sony KP-51WS510-convergence ic-help

936 posts / 0 new
Last post
DonC
DonC's picture
The only info I can givee you

The only info I can givee you is that it is a Sony 51 inch projection TV model number KP-51WS510. I believe that the "D" board is the one in question. I think the part number is A-1302-708-A.

Any help would be greatly appreciated.

galvan
galvan's picture
I have sony KP-53S30 with

I have sony KP-53S30 with convergence problems. I've replaced IC's and still can not control the colors.

rhiotronics
rhiotronics's picture
cheap ICS? same prob. ordered

cheap ICS? same prob. ordered china chips. pay the extra for the sanyos if you didn't.

evil
evil's picture
Click below for full repair

Click below for full repair kits that come with step by step instructions.

ti_chris
ti_chris's picture
I have convergence problems
I have convergence problems with my tv as well.  I got the service manual, replaced the ICs, replaced a broken pico fuse (PS5001 as always) and I've pulled out a busted inductor but I can't find all of the information that I need to replace it.  It's a 22Uh inductor, but I don't know what tolerance it has.  Anyone has a clue?  The service manual only specifies what i put in here.

Pages

 

Connect With Techlore