Mitsubishi WS-65813 Blinking Green Light

1639 posts / 0 new
Last post
frankrcuza
i have a mitsubishi tv ws

i have a mitsubishi tv ws-65813 and i turn on the tv and go back off like in 5 second

mike swift
i have a ws-65813 need to

i have a ws-65813 need to know if i can buy a new board in stead of re doing old board. thaks my email is [email protected] mike.

Larry Dillon
nope sorry MIKE the DM boards

nope sorry MIKE the DM boards are no longer available!!! Repair is the only option. Sorry the DM is no longer available. my best advise would be to go to tvrepairkits.com and order the blinking light kit for your model it includes top grade Panasonic capacitors, easy to follow directions with pictures and free on-line tech assistance in case you run into a snag with the repair GOOD LUCK!!

LARRY

Rick123
Cry for help!

Cry for help!

WS-65813, blinking green light after power outage...... Error code 21

[email protected]

Peter A.
Mr. Dillon,

Mr. Dillon,

I have a Mitsubishi WS-65517 and the green timer light on my set will not stop flashing. Well, it does momentarily, but then it starts flashing again. This happened after we had a pretty severe storm. I guess the surge protector failed to do its job. I see that you are sending information on how to conduct possible repairs. Would you please send me the information too at: [email protected]

Thank you so very much in advance!

Geoff A.
Soldering BA09FP (IC9C25)?

Soldering BA09FP (IC9C25)?

A 30W soldering iron does not seem to be big enough to unseat it? Obviously I don't care about the old one but if I use a bigger (hotter) iron to install the new one I am concerned about damaging it with the heat. Comments please.

I have moved on to here after replacing the four capacitors on the DM.

Thanks for all your patience and time Larry

Geoff in So Cal.

Larry Dillon
no a hotter iron should not

no a hotter iron should not damage the IC as long as you do not burn up/ damage the printed circuit board.

lvtraveler
Larry,

Larry,

I have Mitsu WS-55711, with the blinking green light of death! Is the best solution to got to repairkits.com to get the parts and the fix?
Can you email me the fix you have?
On a side note, do you still need pictures of the back of this TV as I will be tearing into it soon.
Thanks in advance.
Lvtraveler
[email protected]

luuluu
My Misubishi 73" model#73732

My Misubishi 73" model#73732 green light flashing non stop.Can you show me how to fix it?.Thanks
[email protected]

seniomsed
Hello Larry, You helped me

Hello Larry, You helped me fix my MIT.65513 tv 2 years ago and it's still working great! I was changing some antenna connections in the back and noticed through the vent holes an intermittent blinking or fluttering green light located near the DM board. Is this normal or a sign something is going bad? Should it be a constant green light? My email is [email protected] Thanks-Dave

Larry Dillon
sorry, but I do not have any

sorry, but I do not have any service info on this model, but if you get a service manual maybe I can assist you or guide you in the right direction for the repair.
Larry Dillon

luuluu
Hi

Hi
Larry can u help me?
I have Misubishi 73" model#73732 green light flashing non stop.Can you show me how to fix it?.Thanks
[email protected]

sertsarge
Larry

Larry

I am also looking for assistance with my Mitsubishi Ws-65511. I have the blinking green light problem. Can I get your infamous fix sent to [email protected]

Thanks much

Jim

fernjarrell1
I also have the dreaded

I also have the dreaded blinking green light - what buttons are U suppose to hold in? I haver tried resetting with a pin and the light goes out then but blinks again as soon as I release the pressure. What should I do

Larry Dillon
I need more info like a model

I need more info like a model number and an e-mail address would be a good start

mboule
Larry,

Larry,

Thanks for this forum and all the info. I have a WS-65813 that had the caps replaced last year and haven't had any issues since. Can you send me the service manual so I can clean the mirrors? Send to [email protected].

Thank you,

Mike

parks
We replaced 10 capacitors in

We replaced 10 capacitors in our set and still the green blinking light! Any other fix? Wd-62725. thanks much!

J2
Larry,

Larry,

I just bought a WS-65813 and checked it out working at the house loaded it up and drove home, unloaded and plugged it in and now have a constantly blinking led. Everywhere I've looked it seems You're the guy to ask for help with this and the first try for a fix is to change the caps on the DM board. I have a copy of the service manual and training manual. Can You please email the info on this fix to me 97gts(at)comcast(dot)net Thanks

JT44
Hey Guys -

Hey Guys -

I have a WD-73732 with the blinking problem. Could you send me the info to replace the caps? My email is [email protected]

Thank you.

Larry Dillon
you are posting under the

you are posting under the wrong thread and will most likely not get the right info you really need. look at the model number you posted and the thread model liated??

picrthis
JT44 said:

JT44 said:
Hey Guys -
I have a WD-73732 with the blinking problem. Could you send me the info to replace the caps? My email is [email protected]
Thank you.

Wow those have the same problems as sets bought 7 years ago? Guess I'll never buy a Mits of any type ever again then.  By the way had my caps replaced and it did not solve the issue (WS-73909).

NTG
Hi Larry,

Hi Larry,

I've got a 62' Mitsubishi (WD-62525) with this infamous green blinking timer light problem. It happened once before about 6 months ago but simply unplugging and letting it sit overnight got it up and running again. This time... no luck. Before I give up and have to call a repair shop, can you send me the information on repairing the caps please? My e-mail is [email protected]

Thanks for all your help!
Nick

DMonty
Larry, I have a WS-55859 and

Larry, I have a WS-55859 and the Mitsu green blinking light issue. You may be done with this after 2 years but...could I get a copy of the relevant diagrams and repair instructions? My email is: [email protected]
Much obliged, DMonty

jsmith
I have a ws65511 and the

I have a ws65511 and the blinking green light and tv wont turn on. Could this be fixed with the info that everyone is requesting?

picrthis
jsmith said:

jsmith said:
I have a ws65511 and the blinking green light and tv wont turn on. Could this be fixed with the info that everyone is requesting?

Your mileage will vary, in my case for a WS-73909 changing out the caps didn't do solve a thing. Mits authorized repair guy then came out and checked out the set and said the DM needs to be replaced, however Mits doesn't have that any more, so the HDTV is not repairable. 

So now I have $10k large black lump of coal in my living room and I will NEVER purchase ANYTHING with the name Mitsubishi on it, and I tell EVERYONE that I know or meet about my Mits; they are now getting free advertising from me; altough NOT positive for them!!

 

JT44
Have you contacted Mits

Have you contacted Mits Directly? I have a 73 1.5 yrs old and the replaced everything at their cost. Standard warranty was 1 yeer.

tmatic
I have a WS-65813 TV and am

I have a WS-65813 TV and am also getting the blinking green light. Please send me the directions to replace the 4 capacitors at [email protected]. thanks.

dodi142004
I already made this request

I already made this request in another thread but I was not sure if that was the correct place. Since everyone in here is asking the same question about the blinking green light, forgive my similar request for the instructions on replacing the caps on the DM board. WD-52525

Thanks so much, Desperately Yours...
Dahn Paul

pauldee0046 at yahoo dot com

luuluu
Hi

Hi

JT44
Member
•member since: 07/03/2009
•rank: 425 of 33439
•2 comments
July 3, 2009 6:54 AM updated: July 3, 2009 7:00 AM

Hey Guys -

I have a WD-73732 with the blinking problem. Could you send me the info to replace the caps? My email is [email protected]

I had a same tv ,same problem .you need to change the Dm board .then you will watch tv again .That is the repair man fixed my.Or you can do it your self

gary jacobs
hi larry. im working on a

hi larry. im working on a mits ws55613, green light blinking about a min then stops. have replaced the 4 caps on the dm board but was no help. do you have any instructions you can send me on this. thanks!!!! gary

Pages

 

Connect With Techlore