Larry Dillon said: I am sorry, I do not have that manual yet. I was suppose to receieve it last week but I have not gotten it as of yet . You can still use the instructions and figure it out with everything I sent you. Go though everything first i sent to you. Then compare what I sent you with your TV set. If I receive the manu8al shortly, I will cetainly forward you a copy.
Larry or anyone could you Please send me the fix for the blinking green light...My power went off and when power was restored the green light blinks all the time and the TV never comes on...E-Mail: [email protected] Thanks
Larry Dillon said: If you are handy, and can solder, you may be able to save about 700 bucks if not more. There is a very common problem with these Mitsubishi TV sets. There is a digital board inside
Larry can you send me the instructions to fix this issue? Thank you [email protected]
I am one of the 30-35% of the people that the capacitor fix did not work for. Is there anything else that I can do without having to haul this thing to the local repair man (at a cost of $250 just to unscrew the screws and take a look.)?
Hey Larry, i have a Mits. Model # ws-65813, and i too am having the problem with the blinking green light. I left for a few days and noticed the light when i returned home. This is the first time this has happened. Can you send the info you have to resolve this problem?? Thanks, and Merry Christmas
I am sending all the folks who are requesting the documents for their TV set. Jason, Do you see what model number is on this thread? Now I will have to stop what I am doing and make a new e-mail, as I am working on the xxxx13 type of TV set. Good Luck with the repair.
I am also having trouble with the horrid green light. I have a mitsubishi ws-55513. I would greatly appreciate it if you could help in any way!!!!! Thank you for your time and help!!
Nessa, I certainly will forward you the documents as well as the service manual. Make sure you read it all the way through before attempting anything and if you have any questions, please do not hesitate to let me know. Good luck with the repair.
Do you see what the model number is on this thread man? Gosh! Your model has nothing to do with this Problem. I would be more then happy to assist you if this was the issue,
Well After a reset the blinking light is no longer an issue. The TV starts up just fine but the colors and still terrible. The TV picture is very WHITE - the colors are very dim. The best example is that the Blue Directv header is basically grey. What could this be?? Is the bulb the issue? Any help would be greatly appreciated in this department.
larry, You look like you are the TV god here. I was woundering if your fix would work on the WD-62525. If so could you please help me out by sending me the information you have. [email protected]. Thanks in advance for the help.
I have a Mit wd-62725 and of course the green light of death. I have done tons of research. I have already ordered the caps from mouser friday. I want to be fully ready when I get them can you possibly email me the repair manual for this set. I have the orignal factory manual and the service manual downloaded already. My email is [email protected]
Ah and also I am getting an error message of 37 I found sites that says this is 37 = Exhaust or Lamp Ballast Fan stopped and in the service manual I downloaded from another site says 37 Engine (DMD or Lamp) Fan Failure. My question is am I on the right track on replacing these caps on the DM board?
Marco, your problem most likely is not the DM capacitors. You can certainly open it and have a look. I would take a look at the fans and replace the sensor. Sometimes when this error occurs, the optical engine is bad, and sometimes it is only a bad fan. Do not attempt to save a few bucks and try and get a replacement for the fan. Order the right one. You will be better off in the end.
Thanks Lary for the How to I am getting the Caps. soon...My TV came back on but that only lasted a day...Now the geen light flashes and goes out after a minute but the TV does not turn ON...I will replace the Caps and see what happens..Thanks again
Can you send me instructions on how to repair the constant blinking green light on my mitsubishi tv, ws-55613. I cant locate the dm board and need help. Also need the instructions on how to repair.
Like everyone else in the world, my -13 series mitsu (ws-55513 to be precise) has gone green. I'm sad and lost and alone and I'd really like to watch the game in HD. Can you help a buddy out? My soldering iron is hot and ready.
Also, will high heat tolerance caps be enough to stave off future occurences, or do you recommend some sort of added cooling system? Many thanks in advance.
Third Mitsubishi 65" set that we had the "flashing light" problems with. The dealer was kind enough to replace it twice - since it was brand new. The third time we upgraded to the "Diamond" model (WS-65813), thinking we would get past the problem. Now we've had the set too long to get the replacement. Please forward the instructions to: [email protected]
Larry Dillon said: If you are handy, and can solder, you may be able to save about 700 bucks if not more. There is a very common problem with these Mitsubishi TV sets. There is a digital board inside these puppies called the DM board. A lot of times there are four capacitors that go bad inside of these TV sets. Sometimes, depending on how bad the capacitors are, and if the capacitors did not blow out anything else on the Dm board, you can simply replace these four capacitors and this will fix your TV set. The average that this works on is about 65 to 70 % of the sets can be repaired with this fix. The others are power supply issues or the DM board has other issues. If you would like to attempt to repair your TV set, I will send you the instructions on how to do so. If you do not know how to solder well, do not attempt to replace the capacitors yourself. Pay a pro to do this for you. After all you are already saving a bundle of cash. Leave an e-mail address, and I will forward you the fix with and without the light engine. And if the capacitors inside the board are not swollen on the tops, as the direction shows you what they look like, change the capcitors anyway. I have had a few that looked good but the capacitors were on their way out. Good Luck
Hi, I am new to this forum, but I too am having the same problem with my Mitsubishi Mosel WE-65513 with the continual blinking green light. I would like to try to fix it myself. Can you send me the instuctions to do that? Thanks.
I asked for the information on the Mitsubishi WS65513 blinking green light. Sorry, I thought you had my email information from the site. Oops. Here it is. [email protected]. Thanks!
Larry or anyone could you Please send me the fix for the blinking green light...My power went off and when power was restored the green light blinks all the time and the TV never comes on...E-Mail: [email protected] Thanks
Larry can you send me the instructions to fix this issue? Thank you [email protected]
Larry,
I am one of the 30-35% of the people that the capacitor fix did not work for. Is there anything else that I can do without having to haul this thing to the local repair man (at a cost of $250 just to unscrew the screws and take a look.)?
Any help is greatly appreciated.
Thanks
Ty
Hey Larry, i have a Mits. Model # ws-65813, and i too am having the problem with the blinking green light. I left for a few days and noticed the light when i returned home. This is the first time this has happened. Can you send the info you have to resolve this problem?? Thanks, and Merry Christmas
Cutter
[email protected]
I am sending all the folks who are requesting the documents for their TV set. Jason, Do you see what model number is on this thread? Now I will have to stop what I am doing and make a new e-mail, as I am working on the xxxx13 type of TV set. Good Luck with the repair.
hi Larry,
I am also having trouble with the horrid green light. I have a mitsubishi ws-55513. I would greatly appreciate it if you could help in any way!!!!! Thank you for your time and help!!
Nessa
[email protected]
Nessa, I certainly will forward you the documents as well as the service manual. Make sure you read it all the way through before attempting anything and if you have any questions, please do not hesitate to let me know. Good luck with the repair.
Hey Larry,
I too have the blinking green light issues on a mitsu ws-55807. Your instructions would greatly be appreciated. [email protected]
Thanks.
Chris
Do you see what the model number is on this thread man? Gosh! Your model has nothing to do with this Problem. I would be more then happy to assist you if this was the issue,
Larry,
Well After a reset the blinking light is no longer an issue. The TV starts up just fine but the colors and still terrible. The TV picture is very WHITE - the colors are very dim. The best example is that the Blue Directv header is basically grey. What could this be?? Is the bulb the issue? Any help would be greatly appreciated in this department.
larry,
You look like you are the TV god here. I was woundering if your fix would work on the WD-62525. If so could you please help me out by sending me the information you have. [email protected]. Thanks in advance for the help.
Hi Larry
I have a Mit wd-62725 and of course the green light of death. I have done tons of research. I have already ordered the caps from mouser friday. I want to be fully ready when I get them can you possibly email me the repair manual for this set. I have the orignal factory manual and the service manual downloaded already. My email is [email protected]
Ah and also I am getting an error message of 37 I found sites that says this is 37 = Exhaust or Lamp Ballast Fan stopped and in the service manual I downloaded from another site says 37 Engine (DMD or Lamp) Fan Failure. My question is am I on the right track on replacing these caps on the DM board?
Thanks in advance
Marco
Guys, you are on the wrong model number thread but I will get back to you in a bit.
Hey Larry,
Can you send me the directions for fixing the dm board for a constant green blinking light for my Mitsubishi WD-52525
sorry bout that Larry will wait for you manual.
Marco, your problem most likely is not the DM capacitors. You can certainly open it and have a look. I would take a look at the fans and replace the sensor. Sometimes when this error occurs, the optical engine is bad, and sometimes it is only a bad fan. Do not attempt to save a few bucks and try and get a replacement for the fan. Order the right one. You will be better off in the end.
Greg, I cannot send you anything without an e-mail address.
Hey Larry,
Can you send me the directions for fixing the dm board for a constant green blinking light for my Mitsubishi WD-52525
Sorry, my email address is : [email protected]
Thank you Larry!
Thanks Lary for the How to I am getting the Caps. soon...My TV came back on but that only lasted a day...Now the geen light flashes and goes out after a minute but the TV does not turn ON...I will replace the Caps and see what happens..Thanks again
Greg, I just sent out the info to you. Good luck
Larry,
Can you send me instructions on how to repair the constant blinking green light on my mitsubishi tv, ws-55613. I cant locate the dm board and need help. Also need the instructions on how to repair.
thank you
shirleydh
[email protected]
shirleydh, I will send the documents out sometime this evening. Good luck with the repair.
Hi Larry,
Like everyone else in the world, my -13 series mitsu (ws-55513 to be precise) has gone green. I'm sad and lost and alone and I'd really like to watch the game in HD. Can you help a buddy out? My soldering iron is hot and ready.
Also, will high heat tolerance caps be enough to stave off future occurences, or do you recommend some sort of added cooling system? Many thanks in advance.
[email protected]
Third Mitsubishi 65" set that we had the "flashing light" problems with. The dealer was kind enough to replace it twice - since it was brand new. The third time we upgraded to the "Diamond" model (WS-65813), thinking we would get past the problem. Now we've had the set too long to get the replacement. Please forward the instructions to: [email protected]
Thanks!
can you please send me the [email protected] a bunch
aaron, m_rolfe, andTodd, I will be send you all out the repair documents later this morning. Good luck with your repair.
Hi,
I am new to this forum, but I too am having the same problem with my Mitsubishi Mosel WE-65513 with the continual blinking green light. I would like to try to fix it myself. Can you send me the instuctions to do that? Thanks.
teledrex to where? I am not a mind reader man! I wish people who ask for things would leave somewhere to send the info to.
I asked for the information on the Mitsubishi WS65513 blinking green light. Sorry, I thought you had my email information from the site. Oops. Here it is. [email protected]. Thanks!
That's better teledrex, I will send out the information you requested this morning. Good luck with the repair.
Pages