Television and Home Theater

dead mitsubishi vs-50703 can anyone help?

Submitted by chffan on Tue, 12/04/2007 - 13:09

Forums: 

Hello,

problem with Proscan TV

Submitted by TurboII on Tue, 12/04/2007 - 12:53

Forums: 

My 56" rear projection Proscan TV model PS56670 is having a problem. The picture just starting going out of fucus and looking like a "fisheye" or warped view. This happens after the it has warmed up. I can shut it off, and this will fix it but only for a short time. I have also disconnected the power to reset it, but still did not fix it. It was mfg in 97 and I have never had a problem with it until now. After doing some reading it seems like this might be a convergence problem, but I am not sure.

Blown out TV

Submitted by Celeste on Tue, 12/04/2007 - 12:22

Forums: 

Hello all.  I have an 8 year old Zenith 27 inch TV.  Last night I turned it on,  heard sound for a second, then a pop, and the TV went off.  I smelt a slight burning. I unplugged it and left it off.  Last night was extremely windy here in Wash. DC, with wind gusts up to 50 mph. Thanks for your help.

B&W Checkered pattern on Mitsubishi WD-52725

Submitted by Khaili on Mon, 12/03/2007 - 16:58

Forums: 

B&W Checkered pattern on Mitsubishi WD-52725

 

Mitsubishi WS-65313 Burn In?

Submitted by Mike K on Mon, 12/03/2007 - 15:19

Forums: 

I have a Mitsubishi WS-65313 wide screen HDTV.  It is about 3 years old and I am experiencing a problem, that I believe is burn in.  I watch alot of shows in 4.3 format, therefore, there are FILLER black areas on the left and right side of the screen.  I just noticed about a month ago, while playing my xbox 360, that when the screen is displaying white or bright colors on the screen, the center part of the screen is slightly darker than the two edges (the brighter edges are the EXACT size of the filler area when watching TV in 4.3 mode!)

blinking light

Submitted by 0luck on Mon, 12/03/2007 - 11:53

Forums: 

I have a 55613 rear projection mitsubishi tv that does not respond when plugged in.  The green power light continously blinks.  I have taken the dm board out and it does not appear that the capacitors are bulged.  Does anyone have a technical manual that they could send to me @ [email protected] and have any further suggestions as to what the problem could be?  I also can here a clicking sound coming from unit when plugged in.

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...