Sony KP-57HW40 Convergence

125 posts / 0 new
Last post
DOMIT
I seem to have some

I seem to have some difficulty finding the correct PICO fuses, probably because I don't know what I'm looking for. I find TONS of 125v rated fuses in both 3.15 amp and 5 amp, but none of the voltages involved even approach this. (Ok, obviously I know nothing about electronics!) Can someone please advise what type of PICO fuses (voltage rating as well as amps) and perhaps where to find them?

p.s. Larry, I also emailed you directly at the advice of the gentleman who runs that parts website. Sorry if that was intrusive.

Larry Dillon
I do not worry about the

I do not worry about the voltage only the current. I do however always use a high voltage then what is in the unit. But always the SAMe current!

DOMIT
Larry, thanks for the info.

Larry, thanks for the info. Now I know what to get, I'll report results here. :)

terjavec
i am also having convergence

i am also having convergence problems with my kp57hw40... where can i find a free service manual to guide me. is there a way to manually adjust.

DOMIT
Finally got it done... worked

Finally got it done... worked like a charm! In my case, no blown PICO fuses, just the ICs were bad. Replaced the ICs, (sounds easy, but it's a pain in the.. ummm... neck!) powered it up and the picture was perfect. I had to solder the ICs with the board still attached at the high voltage cable- couldn't get the doggone thing off... but it worked out ok.

danielson
I chose to ask YOU because

I chose to ask YOU because you seem very knowledgeable and helpfull !! I have an AVION LTV-320

 LCD TV (Model name/# is LU32a1a3). It was given to me as a partial payment for some money owed 

to me, anyhow, long story short there is no power cord nor a mannual. I have searched everywhere

for the power cord and can not locate it! Not even a website for this brand of TV to ask for parts and

accessories! Do you have any clue as to where I begin my search! Thanks a million! Danielson

                                                                                                            
 

Larry Dillon
sorry I do not have a clue

sorry I do not have a clue who maks it or where to get parts but you might be ale to find out by looking up the UL and FCC ID numbers

EM3 Gibson
Hey Larry I would like to get

Hey Larry I would like to get a copy of the manual if possible. I have had some problems with colors not lining up perfect. I replaced the green tube due to faulty tube but green projection is arched at top and bottom. My email is [email protected] if you will please send me a copy of the manaul.
thank you, EM3 Gibson USN

5Baileys
Having trouble with the

Having trouble with the convergence< could you please send me a manual for the KP-57HW40

Thank you

Larry Dillon
o to the home page an click

o to the home page an click on the box for fr dervice mnual it is there

jsf2323
Hey Larry i have a question

Hey Larry i have a question for you . Its about a Mitsubishi WS55315 . My problem is the green power light comes on at plug in . Can't turn it off as power button has no effect . Also no pix no sound either . I have noticed i have the 12v and the 5v lines . I am assuming the processor is bad . Have you seen this problem. I am a tech but have no service manuel on the model nor have i seen this chassis before . Thanks for any info you might have as i see your a mitsubishi guy who knows alot about them . James

Doogie
is there a chance you could

is there a chance you could email me a copy of the service manual for my sony kp-57hw40?

thanks Doug

[email protected]

Doogie
is there a chance you could

is there a chance you could email me a copy of the service manual for my sony kp-57hw40?

thanks Doug

[email protected]

Doogie
Hi Larry - is there a chance

Hi Larry - is there a chance you could email me a copy of the service manual for my sony kp-57hw40?

thanks Doug

[email protected]

Mohanty
Hi

Hi
I am having similar issue, where colors do not align. After using your instruction above, it stops at the grid (after pressing 6). Not sure what you mean by white cursor, I do not see any. I have also noticed that the convergence issue going away late in the evening. Please help.
Lal

Larry Dillon
replace the convergence iC's

replace the convergence iC's before making any major change in the adjustment or i could be really hard to adjust whn the set is fixed propely, the adjustments are there to do minor shift changesdue to aging parts, in the convergence NOT any major change in the convregence, replace the IC's first.

Mohanty
Can I get a copy of Service

Can I get a copy of Service Manual at [email protected] please.
Lal

Larry Dillon
what model number is the set,

what model number is the set, you did not mention it. Also look in the technicians corner under the resources tab for a free service manual download.

Mohanty
I need a service manual for

I need a service manual for KP-57HW40 Model ([email protected])

Larry Dillon
like I said that manual is

like I said that manual is available in the technicians corner servic manual download.

BigCountry
I am in need of some

I am in need of some assistance with my Sony big scren KP-57HW40. Started to notice some red green and blue arcing lines across the screen and yesterday the screen flashed red and shut off and the power led blinks 8 times then repeats. I have had the tv for only 6 years and want to know if its worth fixing or trashing. Can you send me the service manual or tell me where to get it? [email protected]

boostlord
can anyone help me, i have

can anyone help me, i have same issue with this set. i want to replace the stated circuit parts and need a schematic or manual to find what to replace and with what parts. any help would be appreciated

boostlord
me email is boostlord@hotmail

me email is [email protected], thank you

Larry Dillon
you can find that service

you can find that service manual and many many articles here that will help you with your convergence problems if you go to the home page and click on the download free svice manuals part way down the page on the left side of the page.
read these also.http://www.techlore.com/article/19631/Sony-Convergence-Procedure/ and this.http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony... Good luck!

BigCountry
Im having a hard time finding

Im having a hard time finding the KP-57HW40 service manual. Help!!!! Is it on the techlore site or some other site.

Larry Dillon
it is avaialable here at

it is avaialable here at techlore. there are two uploads as a mtter of fact it is under the resources tab then in tech conrer the link is

http://www.techlore.com/download/21042/KP-51HW40/

pulsarbird1
It seems you are the only

It seems you are the only place to get real help. I read through all this and understand it. I just replaced the IC's and am able to move the curser now. But it just moves the lines and not on the picture. How do you move the colors around? It said in a counter clockwise direction from the center out, but move the lines to what? When I do move the lines, the light greenish yellow 6

Merovingi
Hi zapdbf, I am also having a

Hi zapdbf, I am also having a problem with blue & green retrace lines. I would appreciate a copy of the service manual. [email protected] Thx.

Rock-D
Hello,

Hello,
I promise to spread the word of techlore. I have the same problem with my Sony 57 projection tv. I am having convergence problem so I am suspecting convergence IC problem. Can you pleasse email me the manual for Sony KP-57HW40?

thanks,
D

brian2831
i have a sony 57HW40 and

i have a sony 57HW40 and convergence is out on one side only starting at the center and going to the left side of the screen.. would this be one ic bad?
any help would be appreciated.

Pages

 

Connect With Techlore