Need Help!!! My tv has a problem with the picture.The picture is blurry around the two sides but not in the middle of the screen.Its like seeing in double vision on the words.It just started all of the sudden.Any help would be great. Thanks
I have a sony trinitron for which I do not have the original remote
control. I just got a dvr box. Now when I turn on the tv
the video source one screen, the dvd screen appears in a little box on
the lower right hand side of the tv scrren. I cannot remove
it. Any help is greatly appreciated
This unit is hooked to an InVoca Remote. In the past , TV would stay off for hours at a time. No response to either power buttons. This time it has lasted for 4 days. there is a memu, but it cannot be accessed until the unit is on. When the power buttons are pushed, you can hear the clicks as if it turns on and then immediately off. Any help would be appreciated.I am raising 3 grandchildren and this is our one source for entertainment.
Hi There, I Have an LG DLP Televistion, Model Number RE-44SZ21RD AKPLKU,it is now two years old, It's working fine but the picture is not as sharp as it use to be. The lamp has still got 8000 hrs left, but I feel i need to let more light through the orifice. I REMOVED THE LAMP AND CLEANED IT WITH ALCOHOL, this has improved the picture slightly but I still would like to allow more light through the orifice. Is This Possible? Your coments would be appreacated, Regards, Tony Goldby.
1.I am new to this so please excuse any ignorance. I have (2) questions, both about samsung tvs?? I have access to a samsung LNS2338w lcd tv that has one line of pixel out on left side, is this an easy in-expensive fix or not worth the bother or time??? thanks
2. I have access to a samsung LNR 237w lcd the picture screen is red and blue and distorted????? can this be fixed or is it too expensive or complicated to bother. thanks alot. regards.
This 36 " tv goes into immediate shutdown at turn on. I can hear the high voltage come up then shutdown. The standby supplies are ok. Replaced vertical ic and several ecaps. Any ideas what is triggering this fault?? Thanks