Television and Home Theater

Sony KV27HFR

I own this tv over 15 years every thing is still working well except I can not watch regular tv channel directly the acreen will not run smooth but if I pass it to a vcr then adjust channel from that vcr it is ok plus I can play all other dvd or sattlelite by rca plug all it work very well some friend told me it come from the antenna. Can I buy that part and replace by myself? Pleasegive me some suggestion thank you.

Toshiba 51HC85 Picture Size

Each time I turn on my Toshiba 51HC85 I have to reset the picture size to 16:9 (Full). Turning off the TV automatically returns the set to 4:3 (Normal). The TV is still under warranty but was thinking maybe it's something that I'm not doing right to lock in the "Full" size. Thanks, Warren

42" Toshiba Plasma Oct. 2005

Turns on there is audio, but no video, At first the video would go off & on, now video went out completely. Any suggestions from expert tech,s out there in Plasma ? I am more experienced in projection, trying to catch up with the new technology Plasma, LCD & DLP. Any tips appreciated !!!

I have two 42" inch Toshiba Plasma, same problem.

42 " Fujitsu Plasma T.V

Manufactured in 2000. Turns on for 10 seconds then shuts off. Now no power at all. Any one ? Tips ? Trying to avoid to order the power supply module board. Unless that is the problem for sure, I would order it if it is !

Hitachi 50VG825 Only Power and Volume Buttons Work

I have a Hitachi 50VG825 that's a year and a half old.  Turned on the set today with the remote and the only buttons that operate the tv are the power and volume buttons.  Same goes for the buttons on the panel.  I can't change the channel, inputs or even access the menu screen.

Can someone help me please. 

M52790SP -over voltage

Bula from Fiji,

I have tested all of the leads on the M52790SP.  With 118.8 acv going to the fuse, the chip tested above suggested DC voltage on all pins except number 1.  Using pin 19 as the ground my tester discovered 8.87 dcv on pins 2 and should be 3.6v.  All the rest of pins 6,7,11,12,16,32,36 tested 4.32 to 4.99 v and should have also been at 3.6v.

Is there anyway, to reduce the voltage or is the chip still the problem.  Your thoughts please. Spence

Pages

 

Connect With Techlore