Television and Home Theater

sony trinitron, model kv-27s40, ser. a826790 wont turn on

When I push the power button(remote or tv) the only things that happen are: I hear the click and the standby light flashes.I hope you can help.

need vsnc info???

   I have a hitachi 55EX1K rear projection with what I think is a vert. sync issue. Case in point, picture rolls w/ continuous motion, no jumping. Called around 4 local repair, but nobody has the courage 2 attempt due 2 the age. What I woulld like 2 ask, is it feasible to try and fix, and easy enough 2 attempt myself?

Need service manual PT56HX41PF Panasonic

I have a convergence issue with my 2002 Panasonic PT56HX41PF -my Brother in law said he could work on it and we think it is the board for the Red crt causing waves- we covered the Red crt and all the lines are straight -just wanted to know if anyone has the manual for this model Panasonic?

Thanks

Hitachi 51swx20b d940 blinking chirping

Had a convergence problem, so switched out the convergence ICs. That fixed everything for a few hours, probably 3 hours.  Then the tv just shut off, and now i have no picture and no sound, but still turns on.  Took the back off, and the red light is on, along with 3 green ones. The last green light D940 is blinking and chirping.  Read other posts that said c707 and e994 were the problem. Switched out c707 and still out.  Ive been searching for 3 days to find E994 but cant find it.  Can someone help me out with this? Thanks,

Shane 

Should I repair it or not?

I have a sony KP53XBR35 RP TV. I have a definite convergence problem from the research I have done here. I have already purchased a new RP (Sony KDS60A300). But wanted to give fixing this old set a try before giving it away or selling.

Here is the issue, I have soldered before and have an electrician friend who knows how to read schematics and use a multimeter. But he has never worked on TVs. I had thought with RP (non-tube sets) that the risk is a high voltage shock was not as high. But it sounds like from reading this board that it may be.

mitsubushi vs-55705

I have a mitsubushi 55" projection tv that has wavy lines going across the screen. At first it was only for about 15 mins after turning on the set and they would go away. The picture would be perfect.  But now they don't go away at all. This is a 6 year old set.  I've been told that it would cost upwards of $600.00 just to start as far as repairs are concerned. Anyone with suggestions or help with this? Thank you.

youngdcn17

Pages

 

Connect With Techlore