Television and Home Theater

i have a sony tv kv-32FS120

My apex digital convertor box just stopped working when tried to turn it on this morning. the company said its internal problem.

i can't seem to get the tv to program back to factory settings so i can get at least 2 channels  through my antenna.   I tried to auto scanner channels it scans up to 125 on the tv but it only shows channel number 5 on the snowing screen, when its done scanning 

Mitsubishi WD-57732 Power on Issue

Hello, I have a Mitsubishi WD-57732 that all of a sudden has the blinking green light problem after cleaning the mirror. I have taken apart the set and have inspected the power board and Dm board. I can't seam to find any faulty capacitors on those boards. When I run the error code check it gives me error code 59. Error Code 59 according to the service manual is a DM short, and I can't find any reference to troubleshoot this. Does anyone know what would cause this? The problem only started after removing the front screen to clean the mirror.

Another Phillips 60pp9202 red convergence problem

Hello guys, I've read the other threads and have followed the suggestions and i am still having a problem so here's my story.

Sony KP-61PS1 strange noises and screen disturbance !?

Hi

I have a rather lovely but old sony TV ( rear projection KP-61PS1), had it since 2003 ! I love my TV we fell out in December 2009 when it went all funky 3D on me.. However after some research and 2hrs of blood sweat and tears I successfully replaced the STK IC's !!  So we were friends again.

phillips plasma tv

I have a philips 42"plasma tv mod 42pf999/79 ftp 2.2a

the problem is that for the first half hour perfect picture then the screen

goes scrambled picture with a fine white line accross the screen.

Switch off for 5 minits and switch on perfect picture then half an hour same problem

Can some one tell me what could be the problem

eric vista 

plasma tv

HI

Can any one tell me how to solve the problem of my plasma tv

PhilipS 42"Plasma Mod 42PF9966/79 CHASSIS 42"HDV3 FTP 2.2A

The problem is that you have a clear picture for half an hour then the

picture goes scrambled with a fine white line across the center of screen, when you switch it off for 5 minutes then switch on the picture is nice and clear and then after half an hour the same problem

what i mean on the screen looks like a painter flicked his paint brush

Eric Vista 

Pages

 

Connect With Techlore