Television and Home Theater

Flashing Green light on WS65909

i have a mistubishi WS-65909. there a flashing green light on the front that stays on constantly. the T.V will not turn on at all. i already have Sears service tech replaced the power board. Still have the flashing green light. The second Sears service tech said that my DM boards is bad. I went to the Mistubishi Electronic in Atlanta place and see if i can purchase a new DM board, but they said it no longer have or services the board. Is there a fix for this or solutions to it?

 

 all responses & helps are greatly appreciated

peters

Magnavox 27MS4504 turns on, clicks then dies

Hello--

 I'm hoping someone can help me out.

Sony KV-36FS13 CRT TV has heartbeat but 'comatose'...

After reading all the helpful responces to the convergence issues with the rear projection Sony HDTVs - of which I own one -  I thought I'd take my chances with getting some help with this big CRT Sony KV-36FS13, Chassis AA-2U.

Please help!

I have a Mitsubishi VS 50707 projection TV.  On monday I was not able to turn the tv off, so I unplugged it.  When I plugged it back in and pressed the power button to turn it on nothing happened no power.  Could someone please help?  my email is [email protected]

 Thank you,

HDMI works, RCA and coax doesn't

I turned my TV on one morning and to my surprise all my "cable" channels were gone, pure static, I figured the cable company was experiencing some issues so I didn't worry.

 Next day it still didn't work, so I thought that the cable that goes into my TV was faulty. I tested it on another TV and it was fine.

 So the problem is with my TV.

Then I tried to play Wii (connected to the RCA jacks) and I didn't get any video/audio either.

Mitsubishi WD-52725 green light timer keeps flashing

Hello,

 Looking for help

My tv started doing this Thursday and I first press the reset button which did nothing

then pulled the plug let rest for 10 min the tv came back on the problem occurred 3 more times so now it is just unplugged

I am thinking the problem is the capicitors 16v went and bought 35v

Looked at the manual for the WD-52725 but I do not know hoe to get the DM board out. I was going to take out to install 35v

So far I have taken off the back panel but have not moved forward looking for advice

Pages

 

Connect With Techlore