Television and Home Theater

Hello, I am having a bit of a problem with a tv that I acquired. first of all the tv would not power up. I pulled the power supply board out and found a transducer that lost a solder joint and fixed that. Thought I was doing alright but when I turned it on the picture was bad it was really red and can not be adjusted in I looked in the guns and the coolant is clean in all three in fact I would say that it has recently been changed it was that clean.

Hi there!,

I have a Toshiba TP50H60, which when plugged in, will show the word COLORSTREAM in blue on the screen and then go blank. It blinks its red Power LED also. Any Ideas are appreciated :)

Adam

Pensacola FL

I have a Sony KP53V75... Convergence is off and has been since I have had it... I went ahead and replaced both the STK's and also lifted 1 leg of all of the resistors near the convergence chips and tested them... They all read in specs of 2.2 to 2.4 ohms... Resoldered them back in and went into menu and went through the convergence settings there... Things were still not right... I then went into the service menu and reset everything to factory defaults... I then went back into the convergence menu and re-aligned... Still whack...