Mitsubishi WS65513 Blinking Green Light

2603 posts / 0 new
Last post
Koobiidoobii
Larry,

Larry,

You are a life saver......I have a 65315.  It is about 4 years old.  I haven't had problem with mine yet but I am anticipating the problem.  I would also like to have the instruction if you would be so kind.  Please forward to [email protected].  Thanks in advance.-Koob

Pat Moran
My WS65713 is having the

My WS65713 is having the problem, Larry could you please send me the instruction on how to fix this.  I can solder ok, it's been awhile.  Email [email protected]

Thanks,

Pat

gerry1114
gerry1114 said: larry you

gerry1114 said: larry you sound like the man that will save my tv. could you send me the info on the blinking green light its a ws65513. please football not the same on a 29 inch tv

heres my email [email protected]

Delman
Larry,

Larry,

 I'm having the same problem.  Could you shoot those directions to me?  Email is  [email protected]

 Thanks.

TedW
Excellant !!!

Excellant !!!

I thought I was going crazy with this blinking light thing...

Hit the remote button this morning and all the green light does is blink.

Will this fix also work for the Mitsubishi WS73713 ?

If so, could I humbly ask that I also get the fix on this emailed to me.

Really appreciate it. Email is : wiersma7 AT cox DOT net

Thanks

Larry Dillon
I have sent the information

I have sent the information to Ted, Gerry, Pat, and koob. If you do not know how to solder or think this will be too involved for you, play it safe and call in a pro to assist you with this repair. Good Luck

Delman, I tried to send it to you but it cam back as a bad e-mail address.

stebenroy
 Larry will this work on a vs

 Larry will this work on a vs-50703 see post in forum on same model.

TedW
Thanks, got it.  really

Thanks, got it.  really appreciate it !

Now I need to go and find the service manual to clean the inside of my Hitachi  50FX19K or 20B. Whatever it is. LOL

Ted W 

CarlosNCharlie
Larry Dillon said: If you

Larry Dillon said: If you are handy, and can solder, you may be able to save about 700 bucks if not more. There is a very common problem with these Mitsubishi TV sets. There is a digital board inside these puppies called the DM board. A lot of times there are four capacitors that go bad inside of these TV sets. Sometimes, depending on how bad the capacitors are, and if the capacitors did not blow out anything else on the Dm board, you can simply replace these four capacitors and this will fix your TV set. The average that this works on is about 65 to 70 % of the sets can be repaired with this fix. The others are power supply issues or the DM board has other issues. If you would like to attempt to repair your TV set, I will send you the instructions on how to do so.  If you do not know how to solder well, do not attempt to replace the capacitors yourself. Pay a pro to do this for you. After all you are already saving a bundle of cash. Leave an e-mail address, and I will forward you the fix with and without the light engine. And if the capacitors inside the board are not swollen on the tops, as the direction shows you what they look like, the capacitors are most likely not your problem.

Larry, my TV showed all the signs that everyone has been talking about in this tread.  Can you please send your document to the following address:  [email protected].  I have the back of the TV apart, but I want to look at your pictures and see if the capacitors are really bad.

 Thanks

CarlosNCharlie 

Larry Dillon
stebinroy, I do not think the

stebinroy, I do not think the VS models have the DM board in them. I am not sure, I lost all of those older model numbers due to a fire. It would be an interesting thing to find out. If you get the manual, please let me know.

worm
Yes I received the  documents

Yes I received the  documents larry thankyou again.

I replace the four electrolytic capacitors on the DM board but no change still blinking led, I even the a conunity check of the  four fuses on the DM board they are okay.

where do I go from here?

Larry Dillon
worm, you will need to make

worm, you will need to make sure there are no other swollen capacitors on the other boards. Also if your able, look on the schematic and see if the voltage are correct going into the DM board. Sometimes the capacitors will mess up the incoming voltage supply from the main power supply. Check voltage in the DM board also. I have also heard that the shield will short against something. Double check all of the wiring harnesses for loose plugs.

Delman
Delman said: Larry,  I'm

Delman said: Larry,  I'm having the same problem.  Could you shoot those directions to me?  Email is  [email protected]  Thanks.

Yeah, I'm an idiot.  It's [email protected] 

Mark
Hey I have a WT-42315 with

Hey I have a WT-42315 with the same problem.  Do you instructions for it like for the above probs as well?  If you do, pls send them to [email protected].  Thanks a bunch!

Larry Dillon
shams, your set does not use

shams, your set does not use the DM board. What are your symptoms?  If the set is dead or a blinking light, there is probably bad capacitors in the power supply or maybe even the sweep power supply. Look for swollen tops on the capacitors in these two circuits, Good Luck

Mark
When the tv is plugged in,

When the tv is plugged in, the timer light come on solid for about 2 seconds, then it blinks for about 2 more and then goes off.  I can here I faint high-frequency sound coming out of the tv when its plugged.  I do not know where the power supply/sweep power supply circuits are and cannot find schematics online anywhere.  You couldn't tell me where to find them in the tv, could you?  Thanks!

Shams

Joe Mama
HI Larry, I have Mit tv

HI Larry, I have Mit tv ws65513. the DM board bab, i just replace 4 cap but it's still same problem

(green light plashing),  please tell me what i have to do next. Or can you sen to me the instruction?

Thank you very much

Quan MN 

Larry Dillon
shams, the coinvergence IC's

shams, the coinvergence IC's can cause this a lot of times in this TV set.

Donna
I'm one more person having

I'm one more person having the exact same problem with this TV. Could you please send out another set of instructions? Regards, Brian

scott kent
Ok, I replaced the capacitors

Ok, I replaced the capacitors. All four were bulged out at the top. I got everything put back together and still have the green light problem. Any ideas, or is it time take the TV somewhere? Also could you send me the instruction manual that you keep sending out to everyone. I would like to take a look at it. My TV is a Mistubishi WS-65613. Thanks [email protected]

Larry Dillon
niceboy and Brian, where can

niceboy and Brian, where can I send them to?

acv
I have the WS-55513 Mitsu.  

I have the WS-55513 Mitsu.  
It is having the same green light blinking problem.  
I have tried the Reset button, and it doesn't work.
I also tried holding the Menu button down for 10 seconds and that doesn't work.

Could you please send me the info/instructions on how to repair it.  
[email protected]

Thank you.

Donna
For me the address is

For me the address is "[email protected]". Thanks again.

Larry Dillon said: niceboy and Brian, where can I send them to?

Kayo
Hi Larry,

Hi Larry,

I also am having the blinking green light of death.  Could you please send the instructions to [email protected].

Thanks,

Tim 

Larry Dillon
I just sent the last five

I just sent the last five persons who requested the DM repair the directions along with a factory service manual. If you did not leave an e-mail address or it is wrong you will not get one. Good Luck to all of you.

jgriebling
Larry,

Larry,

Please email me the instruction. My TV is a WD-62825.

Email address: [email protected]

 Thanks

Lou
Larry,

Larry,

Would you provide me with repair instructions for the Mitsubishi WS-65813 Blinking Green Light issue. Procedures, Service Manual, Parts List, Repair Photos and any other data. E-mail: [email protected]

Thanks,

Speed

worm
It seems like mitsubishi has

It seems like mitsubishi has alot of problem with these sets or they awear of the problem

Robert Sanchez
Larry Dillon said: just sent

Larry Dillon said: just sent them

I took apart my mitsubishi wd-52725 and have removed the E2Pcircuit.  Where Do I get a replacement E2P?

phil4607
Last Mitsubishi for me... I

Last Mitsubishi for me... I have the blinking light of no TV as well.

Could you please send me the 2 documents that have seemed to help so many.

Thanks!

[email protected] 

Pages

Topic locked
 

Connect With Techlore