Television and Home Theater

I  replaced 2 poped caps on the main power board for a friend, this plasma TV is a Dell W4201C HD which is a rebadged Samsung model not sure which. Any how I found these 2 caps on the main power board did a search for common problems with this model and sure enough its fairly commom for these perticular caps to go out because they are underrated so I replaced them with the reccomended replacement.

So it appears as if one of the convergence chips died on my tv. After dealing with a picture that looks half 3D and half...semi-regular I scraped together the $46 dollars for the two convergence IC's. My wife is pissed at me, due to the fact that I just wasted $46 dollars on two parts and that we can't afford to replace the one we have. Like I said... I replaced the convergence IC's (STK392-560) with new units. After turning the tv back on it has some sort of vertical pincushion. Additionally each color appears to be rotated slightly horizontally through the center of the TV.

So I finally decided to fix my old WS48511. I found all the information about the Caps going bad on the DM power module, etc. When I went to check none of the caps were bulging. I used my multimeter to test resistance and every cap increased to infinity. I know this is just a rough , rough indicator they "may" be ok but everything I've read finds people with failures with bulged caps. On a whim I decided to check the power button and it completes the circuit fine. The TV has zero response when the power button is pushed.