Television and Home Theater

Sony Trinitron no video or sound

Submitted by improver on Tue, 08/07/2007 - 01:26

Forums: 

I have  Sony Trinitron KV-27V40 that shut off and is flashing a 3 blink code.  We raplace a resistor and found a dual transistor Part # MX0541B to be shorted out on one side.

Should I be looking for any other bad parts and are we going in the right direction.

The code information said to check T603 and R672.  T603 is ok but I can not find R672.

mitsubishi rptv

Submitted by 3John on Mon, 08/06/2007 - 23:51

Forums: 

Model VS 5082 s/n 101970. pressing any action button, on remote or control panel, there is a delay of o-15 minutes for the action to take place, i.e at times the power button turns the set on normally, but most often up to 15 minutes before the set turns on. Once on, everything works great, except when I want to change channels or volume, there is the delay. If I can get the input button to advance to the dvd, which it does eventually, then I can change channels through the dvd. This problem started about 3 weeks ago; the dvd revorder is about a year old.

Samsung HCN653W Hi Voltage problem

Submitted by ChristineLydia on Mon, 08/06/2007 - 18:22

Forums: 

I apologize if I'm addressing a topic that has already been dealt with, but I have read through a ton of threads and haven't really come across one pertaining to the problem my tv has been diagnosed with.  The TV had no picture but the front standby light would begin flashing when powered on, which has been mentioned in other people's posts a number of times.  I just got it diagnosed and the guy said it had a defective high voltage that needed to be replaced?  I haven't really seen anything on this, so I was wondering if it would just be a part I need to order or what? 

Horizontal lines and too light picture

Submitted by Dogs and cats on Mon, 08/06/2007 - 15:36

Forums: 

 I purchased a new vcr/dvd combo player for my rca television.  I ran the cable through the old vcr but had to run the cable directly into the tv with the new model.  Now the picture is too light and I have horizontal lines.  The picture was fine with the old vcr.  I have tried everything to adjust the color & lines but nothing works.

no blue in picture

Submitted by gingerg68 on Mon, 08/06/2007 - 14:42

Forums: 

I have a Rca D52w20yx1 and there is no blue in picture. Anyone know what this might be?

thanks....

LCD Television

Submitted by PamIam on Mon, 08/06/2007 - 10:54

Forums: 

My 2001 Panasonic PT-50LC13 lamp went out.....I need help installing a new lamp.

 Any help would be greatly appreciated.

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...