Television and Home Theater

Audio on RCA F36650

I have an RCA F36650 that has worked fine for three years.  Recently, without any configurationchange, the Audio is missing (pure silence, no static) when playing a DVD or VHS tape, but it works fine when viewing cable TV or broadcast TV via the anntena.  I have validated the devices and cables are OK (I hooked them up to another TV), and I also hooked up a portable DVD player to the front panel input and had the same problem.   This may have happened overnight when there was a lightning storm.  

Toshiba 32ZD98B CRT TV

My Toshiba is almost seven years old.

Recently the picture has shown a predominantly geen colour and shades of grey are now shades of green.

The red, blue and other colours are well represented but there is a 'green mask' overall.

Is there a simple way to adjust the colour balance back to normal with this set?

 Any help would be much appreciated.

Green lines on TV

I hava 42" Hitachi rear projection TV that suddenly developed fine horizontal green lines. Anyone got a clue?

Hitachi 46UX12B proj TV problem

i recently picked up a old hitachi projection tv model #46UX12B manufactured August 1993 and when i hit the power button i hear a clicking noise from the inside and the power button comes on for a split second but then it shuts down. Anyone know whats up with this thing?

Samsung HCN473W

Hello again Larry, 

If the convergence board is no longer available for this model, is it possible to just change the IC's? There does not appear to be any resistors, or any other components that are burnt or cracked (visual inspection).

LCD/ to Dual PC Monitors

Hey Techs

need some help here.  Just bought a 37'' Sharp Aquos LCD which has S-Video, Composite Video, Component Video inputs.  I have (2) PC's that I would like to connect to my new TV.  I have done a little reading and saw I might need a RCA / VGA Component Video Cable.  But I am confused would I then use A monitor A/B Switch? and then hookup the both monitors to the switch and from the switch to the RCA/VGA component cable.  Does this sound right? thanks for your help and comments much needed.

TechTone

Pages

 

Connect With Techlore