Television and Home Theater

Apex Digital Flat Screen

My tv keeps blowing fuses. I'm just watching it one day and then Pop! it goes out and won't turn back on. I tried replacing the fuse and as soon as I plugged the tv back in Pop! it goes out again. I'll be looking to get it repaired but would like to have some idea of what's wrong with it before I start spending money. There was no power surge at the time (and it was plugged into a surge protector)and  the house circuit breaker wasn't tripped. If anyone has any ideas or suggestions please let me know.

Thanks!

Convergence Panasonic PT-53TW53G

I have a convergence problem - red is bowed up at bottom of screen. Inspired by the write-up by "Chris" I bought & replaced both STK392-110 ICs. No change.

my sony kp53s70 is not working

i have a sony kp53s70 tv i picked up last year. it would not turn on iwas told that the flyback transformer needed to be replaced plus the horizontal output transistor.i was lucky and only had to replace the horizontal transistor the tv worked good for about a year then shut down again. i  replaced the horizontal transistor again it worked for 5 minutes then turned off again.

Philips 42" Plasma code

Philips 42" plasma tv, model #42PF7320A/37, shut  itself off and only yields the following clue:      7 times flashing red LED in front.  Power supply?  Any help with problem and a source for parts, if worthwhile, would be greatly appreciated.

Thank you,

Tvornotv

Green screen on my Sony Kv-27FS13 TV

I have  a SOny flat screen Model# kv-27FS13. I jusat moved and when i took the tv out of the box and turned it on it has agreen screen. the middle of the screen seems to be ok. It' not connected to andVCRS or other equiment, other than the Direct tv DVR.

can this problem be fixed? Is so please tell me. My e-mail is [email protected]

Freeview problem?

I have used a Freeview box for over a year with no problems.  Now when I turn on the TV and switch to digital, the TV switches off and the standby light just flashes. BUT, if I just use the TV on analogue, there is no problem and the TV stays on.  I've tried a different freeview box and the same thing happens.  Any thoughts?

Pages

 

Connect With Techlore