Television and Home Theater

Problem with Philips smart series model 19pS54 C125

Submitted by Flabu on Thu, 10/04/2007 - 19:44

Forums: 

Hi everyone, I just aquired a 1998 Philips Smart Series 18 inch TV.

The TV has one set of AV ports on the back and I have my XBOX plugged into the back of them.

The issue I am having is there is no way to access the AV ports on the TV. I am only able to get channels 1-125. I have tried messing with it in the menus and cannot figure out how to read the video port. There is no video button on the front of the tv or on the remote, and simply scrolling from channel 1 down to 125 doesnt bring up the AV.

This is driving me crazy!

Thanks !!

Mitsubishi WS-65813 Blinking Green Light

Submitted by Speed on Thu, 10/04/2007 - 11:45

Forums: 

Larry & Riley, I received the WS-65813 service manual that you sent and replaced the 4 CAPS on the DM Module with 1000uF, 35V, 105c capacitors. Verified cap polarity and proper solder connections. Upon power up, have the same issue: continuous "Blinking Green Light". Reset button has no effect. The unit makes NO unusual sounds. Could the eeprom board be bad. Is it labeled "E2P" on the DM circuit board.

Cannot open Samsung HDTV 1080i

Submitted by Kyaw on Wed, 10/03/2007 - 23:12

Forums: 

I have a HDTV 1080i 42" wide screen. Previously, it works just perfect. After one nite, I just cannot open the TV. Is there any trick to wake the TV up or I have to bring it to repair?

Mitsubishi TV WS-55313

Submitted by todamia on Wed, 10/03/2007 - 20:43

Forums: 

My three year old mitsubishi seems to have some image problems.  The screen will display a bright green and sometimes hues of pink and purple and red very often as I try to enjoy tv.  A TV repair man says that the Doubler Board may be the cause of the problem.  There was an error code.  The code was 24.  What can I do?

Thanks,

Tom

Philips Plasma 50FD9955

Submitted by dressden on Wed, 10/03/2007 - 20:01

Forums: 

I have a philips plasma 50FD9955 which has some burnt components in the SMPS Power Supply and need either a schematic or pointers to fix it.

 The part was made by Origin Electronics - PNT503 or 3S110071

Valerio can you help

Thanks

Wiring schematic Panasonic PV-DM2799

Submitted by Claudehb on Wed, 10/03/2007 - 16:02

Forums: 

I recently took the back panel off my TV to access and clean the VCR/DVD combo unit while I was pulling the board out a wire came off the main board this wire is black and connected to the high voltage circuit board on the picture tube....Can someone help me put this wire in the right connector?

thanks,

Claude

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...