Television and Home Theater

KV32HS500

I HAVE A KV32HS500 WITH THE SYMPTOM OF 6 BLINKS BY THE STBY BUTTON. FROM ALL

NDICATIONS THAT IS CAUSED BY THE JUNGLE IC AND THE C515 AND 516.  CAN YOU TELL ME WHERE

THOSE PARTS ARE LOCATED AND DO YOU SUGGEST I REPACE THE ENTIRE PCB INSTEAD OF THE

RESPECTIVE COMPONENT. DO YOU HAVE A COPY OF THE SCHEMATIC OF THAT TV. 

 THANKS

BRIM

spider webs in the tv

I have a 1996 60" RCA  television and need the to take apart the front screen to remove spider webs. HELP!

Panasonic -PT53wx54j screen is about to go out

How do I fix my Projector Panasonic -PT53WX54J that looks like the screen is about to go out?

There is a line that makes the screen look like it's pushed in and adjusting the projectors doesn't do much.

Any help an or suggestions?

Mitsubishi Big Screen Blinking FIX Read what I did

My Mitsubishi WS-65513 Big Screen started blinking and would not stop . So I came to this website where alot of people were having the same trouble . I read where the trouble was in the (DM) Board with the 4 , 16v1000 capacitors . That was all I needed I unplug the set and open up the back . Started looking for the BM Board it was on the left side looking into the set (in a case ). I unplug two wires from the top of BM board and removed about six screws, removed it . When I removed the DM board from the case the 4 , 16v cap`s where group in one corner removed all 4 capacitors .

samsung sct57 chassis

Respected all,

This tv used ic  tda8844 and ka4558 , there is a pin cution fault in this set.

cannot adjust with the help of service mode. All pf and ic ka4558 has been changed , still no cure.

 Any idea please.

regards

rawan.

Panasonic PT-56HX41 issues

I have a panasonic PT-56HX41 and I'm having a problem where as soon as i turn on the tv i you hear it power on then after a second it turns itself off. The TV was recently given to me and now went out also so i'm wondering how much it would cost to repair and whether it is worth it or not.

Not sure this information will be helpful, but prior to this problem I was having a concave looking picture.

Thanks

Pages

 

Connect With Techlore