Television and Home Theater

Mitsubishi Rear Projection VS-70707 Video Problem

Hi, I am having a strange problem on this set. It comes on with the picture looking like the tubes are out of alignment and when it warms up, the picture looks closer to normal, except for the 6 inch band of lines running across the screen near the bottom and repeated about two thirds of the way up. I thought it seemed like a problem related to both convergence and vertical. I re-soldered a number of cold and cracked joints and thought I might be lucky, but no. I have a schematic. Any ideas would be greatly appreciated.

Help my wd 62525 timer lights

I have a mitsubishi 62525 that has continuous blinking green timer light and will not turn on .  Can anyone help me solve this problem.  I've read some of the threads about the DM board but don't have a clue how to locate this board.  I'm pretty good at solder repairs but would like some assistance.

 Mark

[email protected]

Mtsubishi CS-2610RC

I can't seem to get the cannels to chnge. Only can only get 3 channels. the TV seems to be locked on those channel. Can anybody help me reprogram the tv to get all channels? 

Sony Projection Dead

I have a sony KP57XBR10W that just went dead. The led blinks continuosly. I have a service manual but the codes listed do not cover contstant blinking on the led. Anyone have any suggestions as to a problem. Set was built 2001

No TV Sound From Home Theater System

Here is my problem, I have a 50 inch Panasonic DHD Plasma Television, Model TH-50PX60U and a cable box from my cable company for HD, Scientific Atlanta, Model 8300HD.  I just purchased a Panasonic DVD Home Theater Sound System, Model SC-PT750.  I have it wired up and can not get sound out of the Theater Sound System when watching a program on the TV.  I get the sound fine when running a DVD disk and watching it on the TV.  What might I

samsung HCN4226W/XAA Convergence Board Issues & Part #

Trying to clarify an issue with the correct part number for the convergence board. Part number on board is BP41-0045B. It also has the name Benhur on it. The manual gives BP95-00146C and SamsungParts.com responded with BP94-00155A. The board I have has two STK392-040 IC modules on it.  Two questions: One-  Any suggestion of the correct replacement board number. Two: The current STK modules are not Sanyo, which is recommended as the correct replacement - Are the Sanyo IC's labeled as such. One more: These STK's run very hot - is this normal ?

Pages

 

Connect With Techlore