Television and Home Theater

I am also victim of the green blinking light and my Mitsubishi WS-65513 has no power. I am somewhat handy, but have never repaired a TV before. I have read it may be bad capacitors in DM Module, but not sure. If anyone can offer pics and or step by step instructions and possible dangers, I would greatly appreciate it. [email protected] 

I have a 60" rear projection Phillips TV that is starting to show red "shadows" on everything. I am pretty sure it is a convegence issue, and understand that the convergence IC's (and possibly some of the resistors and picofuses) probably need to be replaced.

I'd like to confirm that this is the problem before i tear into the TV, and would like to get a hold of the service manual and schematics to run through the menus on adjusting the convergence.

Model: 60P8341 Chassis Model: PTV915 TV Recever: 347H

   Hello to all,

I just bought a used Mits WS-55909 from an individual at an estate sale. I saw it working fine before I bought it, got it home and nothing but a continuous green flashing light, no response to any buttons at all. I was carefull during transport of the TV, so I haven't been able to figure this out. I noticed others have had similar problems, so I thought I'd try to fixthis myself. I am a doiturselfer and do have some soldering experience. Can anyone shed any light on the likely cause and possible solutions? Thanks.