Television and Home Theater

I am trying to fix this LXI 626.54471950 RPTV I aquired.  The set is 19 years old and had/has some issues.  First, I evicted the algae in the Blue and Green CRTs and replaced the fluid in all three guns (with the help of info I gleaned from reading the boards).  I've got the picture pretty well cleaned up, but I'm still having an issue in the upper left corner of the screen, where the convergence is way off.  I'm looking at the Convergence Power Board (A10365-B002) and can't seem to find any info on the ICs.  I see 8 ICs listed on the board (2 x 612479-4 & 6 x N

I have 12yr old Hit. Ultravision 50UX58. Never had a problem. Used now for games. Getting NO power from remote or 'power' button. I removed rear panel and removed power cord connector from circuit board to make sure getting power, which it is. When I put the connector back on the board 4-5 little green lights on the board came on the a slightly brighter one came a few seconds later and TV gave that 'crackle' sound like it was coming on then everything dimmed off slowly. Any ideas what problem might be and if it is worth the cost of getting fixed? Thanks in advance. Bill

I have a relative that has a problem with this device in that the blue screen goes out of phaze drasticly after warm up. I have done some research and realize that this is a relatively common problem and the convergence ICs STK-394-250 are suspect. I did check their solder connection(s) to the main PCB w/o effect. The Horzontal (IC8C01 - ID from purchased svcManual) seems to be at fault from my estimate. To add to this, the heat sing is shared with IC8C02 of the same type and the area the suspect IC occupies has a much greater temperature than 02.