Television and Home Theater

Mitsubishi 52525

Larry,
I have a Mitsubishi 52525 with the green blinking light issue. I have seen that you have sent others instructions on how to fix. Can you please also send me these instructions. I have replaced the 4 capacitors in this set before just wondering if there is a possibility I need to change other caps as well. My email address is [email protected] Thanks for any assistance you can provide!

Magnavox 55P8288

Recentley purchased a Magnavox 55P8288 at a tag sale set displays good picture but has an overall red hue----Possibly just knocked the convergence out in transport or what??????  Any help would be appreciated. Also do not have the original remote or an owners manual.

need help with mitsubishi vs60609 projection screen

I have a vs60609 when I cut it on the green power lights up for about 3 seconds then cuts off.  The tv was in good working condition untill I took it to my inlaws where it stayed for about a year or 2 unplugged when I plugged it up I saw a spark come from the wall outlet.  I was told the circuit board on the left side is out and need to be replaced.  Does anybody know anything else I may be able to do or where I can get the circuit board from? I preciate it  -bbad-

Mitsubishi 55511 red convergence problem

After reading Larry Dillons article on "Replacing Convergence IC's on a Mitsubshi TV Set."   I set out to replace the Convergence IC.

This is what I found out so far: I've tested the 2 Pico 5amp fuses for continuity.  They both tested okay.  I then tested R8C45 and 46 resistors.  They both turned out bad.   The others test out good.

Does this meen that the Convergence IC is bad?

51" widescreen Hitachi HDTV Projection- 6 y/o, Error code 5

Trying to get this TV for free. The guy said it is a 51" widescreen Hitachi HDTV Projection- 6 years old, has an error code 5. He claims it needs convergence or resistors fixed. He must have got that from the error code 5. Can anyone direct me where I can find that info.  I will do some searching so I may find my own answers. Thank you to all who help,

 

Brad

Infocus LitePro720 Bad Artifacting color bars etc

Here is a pix of the Infocus LitePro720 projected image.  Red horizontal line
the entire width.  various width vertical lines and distorted image
throughout.

 

Does anyone know if this thing is just shot, or maybe some simple fix? :)

 

We've tried various input methods, composite, vga, etc. Even the built in splash screen does it as you see below. 

 

Pages

 

Connect With Techlore