Television and Home Theater

Mits WS-55813, not green light blinking problem

Submitted by RyanAS1 on Wed, 01/28/2009 - 02:35

Forums: 

Originally my WS-55813 would not turn on at all and suffered from the dreaded blinking green light. I researched the symptoms of the blinking green light in many forums and found many topics here at TechLore.com and many solutions as well. Well I ordered all the necessary parts, found the service manual, and replaced the 4 caps on the DM. Success! Well, almost... I can get the TV to power on now, but I cannot get the picture to come through clearly. The picture comes through clear in some sections but mostly scrambled horizontally in the rest.

mitsubishi ws55511 wont power up ....... pls help

Submitted by bcbud2006 on Wed, 01/28/2009 - 01:16

Forums: 

i have read all 35,ooo posts now and its apparent that mitsubishi has a few probs. I only have one real issue , i build motors not pcb's and have no idea how to replace the fuses and the ic convergance (stk393-110) .does anyone have any instructions lying around from your personal repair success'.Sorry i'm green and oughta know if i'm outa my league but out of neccessity (i'm flat broke) i have to ask . thanks for any tips ............ thanks,heath      [email protected]

WD-65831 Blinking Green LED of Death

Submitted by tg1000 on Tue, 01/27/2009 - 15:37

Forums: 

 

  Well, my WD-65831 became afflicted with the Blinking Green LED of Death this past weekend.  When the set is plugged in, the Timer light flashes green forever.  No response to power on and no other indications.

  Neither a reset nor leaving the set unplugged for 24 hours cured it.

KP-61HS10 Convergence issue.

Submitted by BZBIGSCREEN on Tue, 01/27/2009 - 14:35

Forums: 

First off I have to say thank you guys for all of your help. I have a quick question. I have replaced both ic chips with new and reassembled the whole tv...I did an auto converge and the green won't come in. I tried to manually move green, won't move. Not up, Not down. Nothing. The green is bowed up at the ends and I can't move anything with it. I can move the red and blue, but if I don't get the green where it needs to be...im screwed. The ic's that I used were cheepies.

55813 blinking green light

Submitted by install112 on Tue, 01/27/2009 - 12:51

Forums: 

I need to know if there is a schematic out there for the dm module board for the 55813. I broke three components on the board (L9B24, L9B22, L9B21) I need to know what the values of these are, so I can fixed them. Called mits with know luck, called repair shop with no luck. Without knowing the tv is trash please help.

[email protected]

Emerson lc200em8g

Submitted by Ronithayer on Tue, 01/27/2009 - 11:10

Forums: 

I have an emerson lc200em8g and it will not turn on.  I have tested some of the power supply and I have voltageafter the bridge rectifier.  I am looking for a service manual for this model.  This tv is made by Funai so maybe some of the other brands that they make will show me what I need.  Any help would be great.  Thank you and hope to hear from you soon.

 

Roni

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...