Television and Home Theater

another phillips convergence issue no cross!

Hello folks, I have a phillips ptv910 55" that has some issues. The picture is hazy and haloed. When i attempt the blue convergence there is only 1 crosshair present. I changed the ic's and I think all of the related resistors. If anyone has a solution for this it would be greatly appreciated. Also if some one could give be the exact resistor numbers that should have been changed, so that I can be sure I got all the bases covered in that department. I am no tech, just a tinkerer , but if someone can detail me some directions I can pretty well follow them.

 

Convergence when set is cold.

Thank you guys for all of
your help up front. I have a Sony KP-61HS10. I have been all over this
thing trying to figure out what is going on, but am lost. I have
replaced the convergence chips (as I see so many others have done) due
to the green being way out of wack. Along with the pair of chip I have
replaced 3 of the fuses.... Now to the weird part. Since then the set
seams to work good...accept when it is cold. The convergence is off
till it gets warmed up. I have checked and reheated all the connections

kp53s70 ic replacement (need service manual)

I have been doing a lot of research on how to fix the ic problem with my sony.  It's a Sony KP-53s70. 

need service manual please

new to techlore will look around tonight and see if i can find some answers but any help would be great  

 

thanks alot

ray

Mitsubishi DLP 52525 Quesstion

Ok i have gone through the television and replaced all of the caps, The green blinking light is now gone but it is still doing the same thing as before. Whenever you turn the television on, There is a Buzzing sound coming from the speakers every five seconds or so, and whenever the buzz happens it sounds like there is a clicking coming from underneath the metal cover on the board that faces twoards the front of the television. I have not taken the cover off to go any further so i thought i would pick ya'lls brains a little and see if you have heard of it before.

 

Mitsu. WS-65869

Hey Guys

Trying to help my dad out in Texas. ( I live in southern cal.) He had new floors installed  he unplugged his TV for about a week. He plugged it back in and just gets a blinking green light. I have read many threads on repair but I need to know the location of the pcb's so he can remove and send to me. Does anyone have a repair manual for his model? (WS-65869)

Thanks in advance for any help.

Brent

[email protected]

WAVY lines on top of screen WS-65315 65 in

IM having Problems with Mitsubishi WS-65315 65 in. Rear Projection tv. I got it about 4 years ago. It has wavy line at the top of the screen about a foot down. what is it? how do i fix it?  PLEASE HELP

Pages

 

Connect With Techlore