Television and Home Theater

Atleast I believe it's a convergance issue from my research.  It seems there is  way to enter a service mode on these tv's by holding 5,power,volumeup,and display   while in tv mode.  I've tried this and it didn't work.  I've tried it multiple times.  the remote i'm using with the tv is model #rm-y909.  Any help on this issue or how I can set the convergance would be a great help.

  I believe this is a generic question which would apply to most CRT RPTVs. My particular tv is a Sony KP48-S70. If you're able to move all three colors both vertically and horizontally while in service mode , does this rule out one or both STK ics as being defective? I can converge the picture fairly well, but not as well as it was before this problem began.Also, the auto focus does not help either. I haven't found any open pico fuses. Voltage is present on the convergence ics,however,it seems a bit low compared to readings reported on other posts regarding this subject.

hey guys. new here on the forum. looks like you guys have a good one here!

so i have a magnavox RL8530 (as far as i can tell this is the model number, if not, where is the model number located?).

i have major convergence issues. i've read a little on your forum about this. where is the first place i should start? does anyone know where i can get a service manual for this beast?

i've never done this before, but there isn't really much that i'm not willing to do.

thanks guys! rock-on!

   -psykobillys