Television and Home Theater

Also have a Samsung HLN437WX

I have a samsung HLN437WX. I have had it a long time now. It came from my mom and dad when they got a new one. It was used very little. It was doing just fine then one day I turned it on and it would not change channel, volume the menu would not come up. and the remote dont work, its like it just locked up. There was still a picture and sound. But whatever you had it on is what you watched. And now when I turn it on, its still the same but now no Picture or Sound. Now, If I keep turning it on and off it will sometimes have sound but no picture. Can you please help me? Thank you.

Panasonic Rear Projection

I have a Panasonic rear projection tv. Older Model. ( model - PT 51hx40b. ) It comes on but no picture or sound. Someone told me to check the PC board. I pulled it out and saw that it looked alittle dark in one spot. Would this could this be the problem? I tried to just order the board but every site I have been to including Panasonic says that it is discontinued and no substatute part.  Thank you.

Sony KP-48v80

I have a 43" rear projection tv. (Older sony ) It has lines in the picture. Not the red, green or blue, but like static lines horizontal. And when there is a really white picture, like the progresive car insurance channel. It flickers and makes a tapping sound and wont quit till the commercial is over, ( or what ever is on. ) And What is An ( IC ) ? And can someone please tell me if the big red wires going to the tubes shock you if it is unplugged? Thank you.

regarding power supply plasma & tip

Hello ,
i need a help,i have a plasma philips modelNo.42PF9667D/10 THERE'S A FAULT in the power supply it only make a click sound but when i aplied heat(with a hairdry) in the power supply the plasma tv start normal with picture & sound ok.
Do you have solution for it?
i need also a service mode code for SUPRA TV ST29AA705FG.
THANKs IN ADVANCE..

Mitsubishi VS-50607 Short Vertical

I am working on a Mistubishi VS-50607 Rear
projection set. I have a short picture at the top of the screen. I
replaced the 100uf/50v caps in the convergence circuit along with the
100uf/50v cap in the vertical circuit.....It does not seem as if the
IC's are bad......this set uses the STK392-110 convergence IC's I am
not able to read the vertical output ID, does anyone have a manual or
some ideas for me????? Shocked

Mitsubishi CS-35405 CRT TV

I recently acquired a partly working Mitsubishi CS-35405 Large CRT type TV. I would like to fix it for my grandchildren's video games. I have an electronics background and in fact have recently fixed some Tektronix oscilloscopes including working on the high voltage power supplies.  

Pages

 

Connect With Techlore