mitsibushi wd 62627 tv blinking timer light

10 posts / 0 new
Last post
Big Silva
Big Silva's picture
mitsibushi wd 62627 tv blinking timer light

Hi i had an issue the other night in which my power went off but returned back on soon afterwards, however now my tv is having an issue in which the timer light continues blinking and the power doesn't come on. After reading around the website i found that similar models were being diagnosed with a DM board issue and i was just wondering if anyone would be able to offer any kind of helpful hints or tips for how to fix this problem. Thanks

Blackwater
Blackwater's picture
Subj: Mitsubishi WD-62627

Subj: Mitsubishi WD-62627 Problems

First it was the Device menu not being shown, then blue screen and then shut down. Then came the continuos green blinking light, and no TV. Now, we don't even get the gleen blinking LED unless we reset the TV, and still no TV.

And they all happened within a couple hours of each other. I'm guessing I've got several over-lapping problems? I've been reading on your site about other Mitsubishi models having DM and power supply problems. I haven't found which set of buttons to push to get the diagnotic code(s) returned. Any suggestions, manuals, or fixit ideas would be appreciated. Technical level is fairly high.

Thanks,
Dave

Blackwater
Blackwater's picture
Hi, Larry,

Hi, Larry,

I downloaded the service manual for my Mitsubishi WD-62627 and followed the instructions for getting the error codes (push both the Device and Menu front panel buttons sumultaneously for 5 secs). Following the reset button push, waiting for the blinking light to stop, and then push these 2 buttons for 5 secs, I get absolutely nothing! Dead as a the perverbial doornail! Suggestions. Thanks.

Joe1224
Joe1224's picture
Blackwater said: Hi, Larry, I

Blackwater said: Hi, Larry, I downloaded the service manual for my Mitsubishi WD-62627 and followed the instructions for getting the error codes (push both the Device and Menu front panel buttons sumultaneously for 5 secs). Following the reset button push, waiting for the blinking light to stop, and then push these 2 buttons for 5 secs, I get absolutely nothing! Dead as a the perverbial doornail! Suggestions. Thanks.

Blackwater or anybody out there figured this problem or know how to fix it?

I have the same issue with a 62627.

Any help would be greatly appreciated.

Thanks

bigguada69
bigguada69's picture
hey guys, please notify me

hey guys, please notify me when anyone has a resolve, this is driving me crazy, every waking moment i am digging, looking, researching, and nothing, this sucks, thanks, Eddie

bigguada69
bigguada69's picture
Dave, i have the service

Dave, i have the service manual, just bought it, if you want a copy, drop me a line, thanks, Eddie

Shemp
Shemp's picture
Hey Eddie, try this....it's a

Hey Eddie, try this....it's a shot in the dark....I had this same problem and now my TV is like new again after I gave up all hope...here ya go...

1) get your remote control
2) hit "MENU" not device menu
3)hit 2,4,7,0...then MENU again (sometimes you have to do it again in a faster sequence)
3a) so to recap....MENU,2,4,7,0,MENU
4) tv will reinitialize itself back to original defaults and possibly, hopefully fix your TV. 5) let me know if this works...LarryS@scottpaint.com

Good luck

ASHAYEGH
ASHAYEGH's picture
I HAVE A MITSUBISHI MODEL

I HAVE A MITSUBISHI MODEL WD62627 AND I SEEM TO HAVE THE SAME ISSUE...IT BLINKS AND WONT TURN ON...I DO THE SYSTEM RESET...IT BLINKS...THEN WHEN IT STOPS BLINKING I PRESS POWER..IT TURNS ON...THE KEEPS GETTING BRIGHTER UNTIL LIKE 20 SECONDS AND TURNS OFF...THEN STARTS BLINKING AGAIN...

PLEASE HELP!!!

ramtexas
ramtexas's picture
So many years have passed
So many years have passed since above comments and there is a capacito replacement fix for the tv not coming on. I want to know what board are the capacitors on that need replacing. I know the value but want to make sure I have the right board for model WD-62627. Anybody help? 
Robinhood
Robinhood's picture
I bought a used ps2 and i
I bought a used ps2 and i cant watch movies on it because the parental password is set for a child how do i change it
 

Connect With Techlore