Television and Home Theater

have had TV for 5 years . Recently installed 4th lamp . The last 2 lamps shattered inside bulb . When I installed the most recent (phillips) it worked great for few days . One morning my wife turned it on and came to me and said it shut itself off . Not sure if she prematurly hit the power button . The lamp looks fine so I purchased a used but tested ballast . It did not help . I installed the old ballast .

I have a samsung tv model ln46c610n1kxzc wnen i plug it into power the red power light flashing 6 times then off, until I plug it out and back in again ,it flashes 6 times again then off. no sound or picture

when i used  the remote the red light responds to the remote signal the tv do not come on  no sound or picture. any help

I replaced the 8 main problem caps, 4 on dm 4 on fmt, after this I was able to coax the bglod to disappear and tv to power on by unplugging the fmt board. The filter cover wasnt secured and fell off causing the tv to shut down. Now I have a red status light with code 41. Resetting many times with the dm and fmt connected (with fmt disconnected red light wont go away) will bring back the bglod. From that point if I try the fmt trick (unplug) it immediately reverts to sold red. If left at bglod it goes back to red status error 41 after a minute or so of green blinking.