Television and Home Theater

Sony KP-57ws500 Convergence failure

Submitted by oJonAdams on Fri, 02/04/2011 - 19:15

Forums: 

So, i'm hoping someone can give me a hand with this.  I've checked the forum threads that people have already discussed this and I couldn't find a solution.

I was having some convergence issues on the TV and came to the conclusion that the convergence ICs were bad.  So i replaced those, no complications, and suddenly the TV was working perfectly. 

Replaced Capacitors Mitsubishi WD-62725, no more BGLOD, but no picture, no sound

Submitted by Dan in MD. on Thu, 02/03/2011 - 09:28

Forums: 

Feel like I am so close to fixing this problem.... BGLOD gone, fan starts up when I power up, but no sound and no picture.... error code 12 (no problems detected).... when I disassembled everything again, the only thing obvious was there was no connecting male end to the female end of "PA" on the DM board...or it might have been the FMT board?   What have I missed?  Any help would be GREATLY appreciated!! It's driving me crazy!! LOL!

Philips 60PP9401 Flashing power light.

Submitted by mptvshop on Wed, 02/02/2011 - 16:00

Forums: 

After replacing the convergence IC's and replacing a couple resistors my tv wont turn on. The standby light on front and all the LED's inside start flashing when I press the power button. There is also a ticking sound when all the lights flash. I thought maybe replacing all of the resistors would solve the problem. After researching this chassis to get the resistor values I'm not sure what to do. It uses both 1 and 2 watt resistors all with various OHM's. Can someone please tell me which resistors to use or how to get this fixed. Thanks in advance.

Mits WD-57733 Green Light Prob - Error 12

Submitted by TahoeBlue on Tue, 02/01/2011 - 23:40

Forums: 

Continuous blinking green light ("timer" light). Error code is 12. No video, no sound. Checked bulb, appears to good. Did a System Reset with no luck. I'm willing (and able) to change out capacitors if the capacitors are the culprit. Any assistance would be greatly appreciated. Thx!

KV-36XBR800

Submitted by kv-36xbr800 on Tue, 02/01/2011 - 22:13

Forums: 

TV is stuck in standby mode.  Blinks 6 times pauses and keeps blinking 6 times on and on and on.  Can you tell me whats wrong and the fix?

Olevia 565 won't turn on.

Submitted by melanhicup on Tue, 02/01/2011 - 19:16

Forums: 

I can't find any documentation that explains how to troubleshoot my issue. I have an Olevia 565 that suddenly won't turn on. When I turn it on the green power indicator turns on and blinks like normal but for much longer than normal. The the light blinks read three times and green once. It repeats this until it is unplugged. 

 

Thanks for any and all help. The company went out of business, BTW.

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...