Television and Home Theater

Sony KDE-37xs955 9 blinks

I have a Sony that has just stopped turning on- no sound, picture, anything (this did happen after a storm where power went on and off, even though I have a surge protector. Not sure if that is related or not).  When I press the power button, the green light blinks for about 10 times, but then it all shuts off and the red standby light will blink 9 times and continously repeat itself.  What is wrong and how can I fix this?

Toshiba 57H81 Help!

 


Hey everyone!
I recently had issues with the convergence on my Toshiba 57H81. I ordered new convergence ICs and got them installed no problem. Now, however, when I try to turn the set on the red power light just blinks and nothing comes up on the screen. I looked into this around the net and found issues with fuses 850-853, but mine are fine. Does anyone have any ideas on what could be going on with the set?

Mitsubishi WS-55813 Blue Screen

I have a Mitsubishi WS-55813 TV set that started loosing Video and Sound (... black screen, but the set will remain ON (no blinking Green Light), or distorded image (... Horizontal Bars). When that would happen,  I turned TV Off and On again, and Sound and Video would come back. About one week ago, we turned the set On and there is a Blue Screen... no video and no sound. All the TV Menus work and look ok. The message stating "no signal is persent set will turn off in a few minutes" is very leagible. When retrieving Error Codes... Code 12: NO ERROR DETECTED.

Polaroid LCD Model 3700 Product FLM-373b No Power

Repaired no power condition by replacing capacitors CP112{10V 1000UF} and CP114{10V 1000UF} with 25V 1000UF High Tempurature capacitors.

Sony KP51WS510 repair ?

 HI- thanks to the good info here I successfuly repaired a Sony KP51WS510 with the 7-blink no start  by soldering in the 2 tiny parts it needed.  I now have a KP51WS510 I got from a friend with a terrible convergence problem.

Samsung HLT5075SX Repost

Set would not come on the first time I checked it. Customer stated it would come on sometimes, but not for long. I ordered a new lamp, When I went to install it the set was on, Customer sait it would go back off in a few minutes so I replaced the lamp, Watched it for 15 minutes, looked good. Next day set doing the same thing. I guess the Ballast would be next, But I will have to order it. Any suggestions or tips? A service manual ?

Thanks

Charlie

 

 

Pages

 

Connect With Techlore