Television and Home Theater

Samsung HCL552W Green Convergence Issue

Submitted by ryanschwartz on Fri, 12/07/2007 - 00:22

Forums: 

This afternoon I heard my wife and daughter yell, "The TV doesn't work". I investigated and it turns out that the green gun has lost it's convergence. Here's a picture of what I'm seeing:

Green Convergence is GONE!

mitsubishi wt-a42

Submitted by v740tech on Thu, 12/06/2007 - 21:32

Forums: 

My rear projection mitsubishi has a double picture. I went into the converge menu to adjust the red and it won't. I then went to the advanced menu and found all of the red is bowed and way off. Tried to adjust but it won't move to the left or right just up and down. The blue will adjust in all derictions. Need help have family coming in for holidays and I have a tv that won't work. Thanks

Mitsubishi WD 62-525 Red Light Indicator

Submitted by swatts on Thu, 12/06/2007 - 15:25

Forums: 

Hi,

 I have a Mitsubishi WD 62-525 DLP t.v. that had the constant red light indicator come on.  I replaced the lamp, but when I turn the t.v. back on it runs for about 2 minutes without displaying a picture or producing sound and then goes back to the constant red light indicator.  Does anyone have any thoughts or ideas on what might be wrong?

TOSHIBA - 40H80

Submitted by milnersXcoupe on Thu, 12/06/2007 - 15:03

Forums: 

 Powers up - no picture / no sound.  Power indicator lamp is solid - not blinking.

 Speakers 'bump' when power switched on.

 Had set on cable radio - no prior picture problems.

Ideas ? 

Replaced Convergence Board & Help!

Submitted by anonymous on Wed, 12/05/2007 - 22:55

Forums: 

I replaced my convergence board in my Samsung HCN653WX and now it only plays in black & white. But the PIP is crystal clear and in color. What can it be??

PT-52LCX65

Submitted by demo920 on Wed, 12/05/2007 - 22:23

Forums: 

I have a Panasonic PT-52LCX65 rear projection HDTV. A green spot in upper left corner of screen has developed recently. There are about 6500 hours on the lamp. Posted online, I've seen numerous possibilities as to what it could be, from the need to degauss, to a dirty green LCD filter, or a faulty optical engine. Does anyone have a clear cut and promising solution to this problem?

Thanks

Pages

 

Recent comments

more
 

Connect With Techlore

Privacy Policy | Terms of Use | About Us | Contact Us | Site Map

Copyright © 2020

 

Our NetWork

MyOpenRouter

Media Smart Home

Magenium Solutions

EHome Design

See all...