Television and Home Theater

Mitsubishi WS65869 RELAY JUST CLICKS ON OFF ON OFF

 I have already changed the capacitors in the DM module and it didnt solve the problem.

 WS 65869

I feel this problem is in the shut down protection circuit. Seems like the power supply will not stay on.

After i plug the tv in,I wait 70 sec for the timmer light to go out. I can pull a code 12. when I push the power button I can hear the relay K9A50 click,cycling on and off. There is voltage at the horizontal out put transister wich comes and goes with the click.

13" Sony Trinitron Lost Sound Function

Lost audio on my 13" KV-13FS100 Sony Trinitron last week.  Any ideas on how to troubleshoot this?  Picture is fine but no sound all of a sudden.  Please help ASAP!  Thanks!

Grounding a TV?

Hello. I have a two or three year old Sharp 32" TV. It has overheated on my twice now, which is strange for it's age. I finally noticed that everytime I touch the screen, the TV has static charge. I rub my hand on the front screen and it's just pure static. I don't know why it is like this, but I assume maybe during a move something got knocked loose and now it's not grounded properly. But it builds up a lot of static charge, attracts a lot of dust, and then overheats. I have taken it apart and cleaned it out, but I want to prevent this from happening again. Any suggestions?

HELP

I have a AVION LCD flat screen TV   MODEL #LU32A1A3

My wife pulled the plug on it while I was watching it.

Now it has no sound

Repairman said it needs a LCD panel Part NLA

Is anyone familar with this.

philips coolant change philips 8p6034c101

i was told i need to have the coolant changed in my 60in tv they said it would cost me $270. and i think thats a bit steep i think i can do it but need to know where to get the stuff i need also a manual for the tv its a philips model# 8p6034c101 chassis # ptv805-ah01 i have repaired other tv so i hope to beable to repair this one thanks for the help

Mits WD-52327***UPDATED 2/9 7:15PM EST***

I have a Mits WD-52327. When I turn it on, Timer light stays lit 'green' steady for ~1 min. Next, Lamp light blinks 'green' for ~2 min. then steady 'red'. Screen/audio never turns on. Intermittant at first, quit doing it for about 1.5 months, now it will not come on at all, the same cycle every time. When it did come on, you could hear the engine firing off, now it won't do it at all. Mitsu said it was the bulb. Is there something that 'tells' the set to turn on the bulb after x-amt of time? If so, I think this may be the culprit.

Pages

 

Connect With Techlore