Television and Home Theater

PT5492S AKAI 54" PROJECTION SDTV CONVERGENCE PROBLEM BOWED SCREEN SAMSUNG

Hello folks. I have a 54" AKAI PT5492S Standard Definition Projection TV with what I believe to be convergence issues. The first symptom was that the screen was bowed down at the top in the middle and the bottom was bowed up in the middle with the thin bowed lines of RGB bordering the top and bottom, which were seperate from eachother. Each of these lines were bowed too, but they were not consistent with one another. The color was much better toward the center.

need help diagnosing mitsubishi ws 55908

my big screen tv is about ten years old and is starting to act funny. last month the picture started to glitch when i turned it on. the picture would come through but warped like a bubble picture. it would be like this for a few seconds before giving a normal picture. the problem has been getting worse and looks like its becoming more of a permanent issue. does anyone know what part seems to be malfunctioning. and how id go about fixing it. its not the connections because it is on all videos. color seems fine. just getting a distorted bubble picture.

samsung hcl4715w problem

convergence went out on my samsung hcl4715w,  replaced entire board and picture is ok.  I cannot get picture perfect to work,  I know I need a screen jig and I do have service manual but do not know how to get it exact and to scale.  Also when in convergence mode, the blue is very dim around edges of screen.  It is so dim that I cannot see it enough to line up perfectly with the red and green.  Has anyone got any suggestions?

mitsubishi 55805 convergence

 The blue convergence started bowing a couple weeks ago, I could reset the vertical but the horizontal would not move. I checked the red and that worked fine. a couple weeks later and the green is all bowed. the red still appears to be alligned, and their is no adjustment for the green. Am I looking at replacing more than the ic's ? and does any one have a service manual for this model. I haven't soldered since high school, but I'd rather break it my self than spend $300. on a tech who may or may not know what he's doing. Any help would be appreciated thanks.

Mitsubishi WS-55511

Larry

 I have found this site and researched may topics.  I now have a WS-55511 that has developed the blinking green light.  It stays on and will remain on even after the reset.  I have read you can send out the diagrams and pictures of some commom causes.  Could you please help and send any info to [email protected]

Thanks

Daved

Mitsubitshi Mod. WD-52525

Mitsubitshi Mod. WD-52525, I need help. I turned it off it was ok. when I turned it back on no picture or sound. I do get static.

Pages

 

Connect With Techlore