I have a Mitsubishi. WS 48511 that I need help with ,it has the green blinking light of death.Checked capacitors and one is oozing a cream colored material.I ordered new caps but need help in how to get the board out.
i have a samsung projection tv model # is hc-p4752w
was convergence problem , replaced all damaged parts but i still need to realign some details,
i don't know how to get in service mode
would you give me the info about this?
This WD 62825 had the V26++ chassis Rebuilt By Mitsu 3 years ago. I started off with "THE BLOD" problem. After many hours surfing techlore and other web sites, I ordered the capasitor kit from TVrepair.com and replaced 35 caps. I only found one bulging cap C8780 on the signal board. All caps that I removed were 105C panasonic. I reassembled, only to have the timer/power light flashing fast again.
I have a Mitsubishi WS-55909 and the timer light binks when it its plugged in then after a while the light goes of and I press the power button, it clicks like if its going to turn on then it clicks off again and never shows anything on the screen. I have already replaced the caps on the md and still does the same thing anyhelp?