Television and Home Theater

Mitsubishi WS-65611 went "pop" & won't power up, no LED.

Panasonic PT-50LC13 AV switching problem

Several of the AV inputs/outputs of this set do not work:
The tv tuner audio works but no video (does going into switching circuit though).
The HDMI and 2 component inputs work (video and audio). The front panel card reader and computer RGB works. No SVideo output.

blinking green light mitsubishi ws 65613

I too have the green blinking light of death...it has come and gone on this TV for some time now, with the TV working beautifully in between...now it will not power up....

 can you send the repair instuctions that I see you have forwarded to so many? 

 email to [email protected]

Mitsubishi WS-B55 - Buttons not responding

Hi,

I have a Mitsubishi WS-B55 HD Projection TV that just started experiencing a problem..

Last night I tried to turn my TV on with the remote but it did not work.

I turned it on from the front panel and that worked but the only other buttons that worked were "Device" and "Enter".

Device cycled thru the devices properly but when I hit "Enter" all it did was go to the next device.

Mitsubishi vs45609, self diag code 23

Hi,

My 7 years old mitsubishi vs 45609 rear projection TV can not be turned on.  Pushing the power button doesn't turn on the TV.  I only hear some electric noise. And about 10 seconds later, I hear a click, and it seems the TV turns itself off. I searched internet, and found the set has self diag feature. So I pushed "input" and "menu" at the same time for a couple seconds. The code is 2 3. Can anyone let me know what it means, what need to check and how to fix the issue?

Thanks

George

Toshiba widescreen doubling video image

Hi,

My Dad has a Toshiba wide screen TV, and when we play a DVD on it, the screen splits in two, and doubles the video, side by side. How do I get it to show only one video image versus two, and why is it showing two of the same picture on the screen? The odd thing is, that when we switch it to the cable, it shows just one image, and on VCR, it shows only one image as well.

If you can email me with some help it would be greatly appreciated. [email protected]

gmd

Pages

 

Connect With Techlore