Television and Home Theater

Mitsubishi WS-55907 turn off 3 sec fluid V-17

When I turn on my TV it shuts off in about 3 seconds.  I took off the back and noticed some fluid leaked on the CCAs.  I cleaned the CCAs off and still have the same problem.  The fluid was mainly on the left CCA.  I haven't checked the fuses yet.  I have a few questions:

 1.  I got an error code 23 (input-menu).

2.   ALL the fuses are good.

3.  Is there anywhere to get a free schematic or service manual?

3.  Any ideas of what the problem might be?

blinking light

help!   my mitsubishi wb-52525 has the blinking light syndrome.  started out freezing up once in a while, then got more and more frequent when shutting off and starting.we could always unplug and reconnect and the set would start, now it wont and the green light is blinking away.... please help--i dont think the repair man i called knows much! Jerry

Mitsu WD62525 lamp light

Seems to be a common problem with these sets.  My green light blinks for a minute then red light comes on.  Tried replacing the lamp, but problem persists.  Occasionally the screen will flash different colors, but no picture.  Would appreciate a copy of the service manual, and any ideas where to start.  Thanks, Barry.  [email protected]

Mitsubishi Ws-65813

I would like to connect the directv receiver to my tv with an HDMI connection, but the tv only has a DVI connection. Can I use this connection, and then use rc cables for the audio?

Thanks to anyone who can answer.

Mitsubishi Ws-65813

This TV just shuts off on it's own at anytime. The green light stays on, but the picture just goes blue. a message on the screen says "check connections or power. The connections for RGBHV or YPrPb may be invalid". By turning the TV off and back on again, a picture returns, but then in a few minutes it goes off again, and the cycle repeats.
Any suggestions?

Mitsubishi WS-65869 No picture

Hi, I have a Mitsubishi WS-65869.  I went to turn it on and the picture was very dark, then turned it off and back on again and there was no picture anymore (faint green and red curved lines show on the black screen).  Pressing menu/device shows code 12 (no error).  I opened it up and the blue CRT is not firing, but the red and green are lit up.

Pages

 

Connect With Techlore