Television and Home Theater

Dead tv set(no picture,no sound)

I have a Daewoo tv set,model DMQ 2975,which is a dead set.I replaced a couple of few things on the power supply(blown fuse,tx transistor,IC in the power supply),which made the set to come on,standby power supply.But not switching the the horizontal o/p(No picture,no sound).Is there something I did not do right or check?I need advice and also looking for a schematic diagram for this set.It's my mom's tv and I want to fix it for her.I will await for your response.

What wrong with Blue

I have a Sony KP65WS510, and replaced the fuses and the ics, tv works ok. except for the Blue now it won't ajust , any suggestiion on what can be missing. and i think you mention that you don't need the manual for this but I like to get a schmatic for this know where I can get my hands on one.

Need service manual for SONY KP-53HS10

Hi guys,

        Got a free set and need the serivce manual to see the service mode data so I can set it correctly. I went through alot of troublr to reconverge it and do not want to dunp it for the prefactory settings. 

            Thanks All

                  Kris

SONY KP 51WS500 - Volume & Menu won't stay on

I just recently moved 30 miles last Saturday. I had been using a Sony Commander remote and everything was fine. Two days ago Directv came and brought a new box. They gave us a new remote with it and I've been using it for the past two days until I set up my surround sound, DVD, etc.

 The Directv remote has been working. Everything has been fine.

Sony KP 43HT20 convergence problems

I found this website because I am having convergence issues with my Sony 43" rear projection TV. I ordered from the internet the 2 Sonyo convergence IC chips and removed the old and soldered the new chips. All 3.15 @ pico fuses were good.

mitsubishi ws 48313

please help !not sure if its a bad convergence ic problem or not. tv wont turn on and i checked codes i get code 21 x-ray protection only . i checked all fuses on both power board and main board all fuses are good!nothing looks bad anywhere on any of the boards. nothing burnt no bad looking caps.when first started relay clicks,  second relay clicks, red tube tries to fire (small flash inside yoke) and then set shuts down. any help to firgure this out would be great or some place i can purchase a power board if its bad.

Pages

 

Connect With Techlore