Television and Home Theater

sony wega trinitron kv-32fv15 picture problem

I have a sony wega trinitron, model KV-32FV15.It takes a while to power on, and when it does, the picture flashes on and off - about a second on, and the one second black screen. This problem started about 2 to 3 weeks ago with just a longer power on process, then the picture flashing on and off a few times until today, when it does it all the time. Can anyone give me a clue to what could be wrong and what parts I would need replaced?

mitsubishi WD-52725 Blinking Green Light Syndrome

I have encountered the awful green light blinking light syndrome like so many of you have been writing about, right in the middle of the playoff games,or as my wife would say during dancing with the stars. Seriously though she can go watch that dancing stuff downstairs,but I need to get this thing up and running asap. I would really appreciate if someone would give me the directions to fix this thing.

Need Help KF42SX300 Ballast Power Supply

I  own  a nice KF-42SX300. After 2 years  the light engine has blown and the light bulb ,also.I change the lightbulb but for the balast circuit of the driver lamp  i didn*t find a schematics. I know how to work with SMD and hy voltage power supply but some components are fried and i cannot view the code of this parts . Maybe is someone who want to help me with this schematic. Sorry  for my english i*m italian. Thanks in advace.

Mitsubishi WS48613 - Blinking Green Light

Hi, I've read several threads regarding the blinking green light issue I'm having. I have a Mitsubishi  Model#: WS- 48613. The power in my house went off and the green light has been blinking nonstop and nothing appears on the screen.  I have tried to reset the TV but have had no luck.  I don't want to miss another weekend of football!

Sony KP-51WS500 red lamp overdriving / convergence

Ok here is the deal. I have a couple of problems I am hopeing I can get some help with. I have a KP-51WS500 television that after it warms up (approximately 15 minutes from initial turn on) the screen goes very red. I am wondering if anyone has had this problem and what the possible fix might be. The other problem that I have is when I go to autoset the convergence it does it's thing but nothing changes and when the screen goes dark you can see the red, blue, and green lines curving across the screen.

Magnavox 60" projection screen convergence Model 6P6030 W101

Hi,
I have Magnavox 60" Rear projection screen TV Model # 6P6030
W101. Just received it from relative. Picture was great on it, but the
characters and people on TV would just glow very bright. I read up on
this and found my lens had a lot bacteria growing in the coolant. I
changed my coolant carefully. I took out each lens one by one, cleaned
and changed each one carefully. I put everything back in the way it
came out, marked all my wires where there should go back. I turned on

Pages

 

Connect With Techlore