Television and Home Theater

sony kv-hr 34 m61 tv

Please help.  İ have the sony kv-hr34m61  tv set and the red light blinks 10 times but if the tv is not turned on for 1 or 2 days then it turns on and works perfectly until i shut it down but then it doesnt turn on again in the next few hours when İ try and its the 10 red light blinks again. Thank You in advance for your help

Mitsubishi 52725 green light Larry will u send manual

Hello,

I have the blinking green light and I have taken the back off the set only to put it back on. Look at all the the threads I see where my DM board is, but I do not know if I have to take out the chassis or there is a easier way to replace the caps.

If anyone has the manual if you could Please forward it on to me I would reaaly appreicate it.

my email is [email protected]

Thank you and have a Merry Christmas

Samsung HC-P4241W Part Numbers

From all I have read, I seem to have a convergence issue with this set. I understand I can replace the ICs (STK392-150) with new ones (upgrade STK392-180), however the parts cost and time/labour to me outway simply replacing PCB board - the problem is I have not found the correct part number of the PCB containg the ICs. There are about 4 PCB's listed for this set, and no real description to figure out which witch is which. If someone knows what this board's number is for ordering from one of the parts sites, it would be helpful.

philips 60in 60pp9202/17f convergence issue

   had   bad   ic  chips  and  two  bad   resistors    the    other   10   6.8oms   resistors   looked  ok   and   checked  them  oms  meter   in   the  board   they  read  4.3  oms  well  i  put   convergence   board   back   in   tv   i,m   able  to   adjust  

Samsung Rear Pro SP43W6HFX/XSA Convergence

Hi everyone, first time post here under this topic, usually spend
the rest of my time browsing the broadband stuff. I posted this problem
on another site – the first one I came across (http://www.avforums.com/forums/rear-projection-televisions/882240-samsung-rear-pro-sp43w6hfx-xsa-convergence.html#post8318277), but haven't had any responses there.

Mitsubishi WS-65908 error code 24

Hello all

I am hoping to get some help with my problem.

Set stats:

Mitsubishi WS-65908
serial 109029
Feb '02

Error Code 24

So here is the deal - I push the power button, I get the usual 'click' followed by the usual high voltage crackle, then 'click' it shuts off..

Pages

 

Connect With Techlore