Television and Home Theater

RCA 52HD won't turn on

When you push the "on" button, there is a humming noise, the light comes on, and then goes off. This happens three times. I have checked the main glass fuse, and the three small brown fuses next to the flyback. <br>I have also checked for CRT coolant leakage, and there is not any. I have read elsewhere that a bad flyback is a common problem with these symptons? <br>Can I check the flyback with it still on the board, and do I have to discharge the red wire coming off of it? If so, how?

Having issues with a 32" Philips Plasma TV 32FD9954/17S

First off, the TV is always on Energy Saving mode (where a red light is steady); when the TV is turned on, the green light comes on, but after a few moments, no image comes up and the light turns red and starts blinking. It is as if the TV has crashed or something. Then I can't even turn the TV off with the remote; I have to go to the TV and actually flick the power off. What exactly may be happening; anybody have a clue?

Mitsubishi VS-60705 PCB Main broken R451 resistor

'55PP9352 55" Philips missing green picture color

(note...SSM has been properly repaired. no problems on this board) 
I noticed there was a slight convergence mis alignement after my SSM was professionally repair. When I go into the blue alignment (big cross) it is lined up, but there is no other color; no other color to converge to. Not sure what other color the blue is suppose to align to.  The red over yellow was able to adjust. What I did do, was select the factory reset and this did not bring back any color. 

Mitsubishi VS-50803

Has Sound but no picture at all. Could someone please help!!!!

Mitsubishi WS-55411 NO Picture

My  Mitsubishi WS-55411 screen started going solid green when
first turned ON, then the picture would come back after a minute or so. Now
it stays green all the time. I pulled of the back and can see the Red
and Blue guns are not firing. There is no picture, just solid green. If
I turn OFF or unplug whatever device (DVD Player) from one of the
Inputs, the green goes off and the blue gun comes ON. So whenever there is something
inputting on any inputs, I get just green. Oh, it's green when you

Pages

 

Connect With Techlore