Television and Home Theater

32PT6441/37 need to access the service menu

I have a Philips 32PT6441/37 and the vertical is slightly too long . Needs to be adjusted about a half an inch. Does anyone know the procedure ? I do have the remote for the set . Thanks James

Sansa guide: how to get videos and songs from DVD, YouTube and other video files

Sansa guide: how to get videos and songs from DVD, YouTube and other video files

Samsung TXN2775HF

Cna anyone help me find a schematic for this set.  THe chassis is H55A.  I have a bad capacitor but I havn't been able to determine what it is.  I am going to try a local store and see if they can help, but thought I would try here as well.

 

Thanks

Mitsubishi WD 52527 green light cycling on/off every 45 seconds

 Evening all,

  Very informative site.  This tv was working fine until we had a power outage, now the green timer light flashes for 45 seconds and then is off for 45 seconds and I can hear something "click". The tv will not turn on.  I've read about "flash codes" but have been unable to access them.  I've been reading about the green light flashing constantly but haven't read  anything about the light cycling.  Will the cycling problem be fixed with the replacement of the caps? Any and all help would be appreciated.

Sony Cold Convergence question???

Just curious if anyone knows why when the set is cold, the convergence is way off. After it warms up, it's fine. Just replaced the IC's with SONY parts and two of the pico fuses. Everything else seams to work ok. Any help would be greatly appriciated! Thanks all!

Mitsubishi ws-65869 red crt board problem

Hey guys, just wondering if anyone could possibly help me with the issue my television is having. It was turned on just like normal and the red was missing from the picture. I check in the front panel and confirmed the red crt wasn't on. After searching through this forum I switched the green board with the red and it does come on and it also comes on with a different model tv board that I have.  I've currently switched the ic, 3 coils, and a few other things from the green board but so far the green still works and the red doesn't so that must mean all the switched parts were good.

Pages

 

Connect With Techlore