I have a Samsung HPS4253xx/xaa plasma, and an Everfocus EDVR16 16 ch cctv dvr. When I connect the vga output from the dvr to the tv it is off to the right by about 50%. I only see half the screen from the DVR. I tried the normal PC input settings and the horizontal shift option doesnt even begin to bring it over enough.
Here's what I've tried:
3 different VGA cables--No change.
I connected my laptop to the TV thru the same input, and it looks fine.
I have a convergence problen on this set. I could replace the resistors and the 2 ICs but would rather buy a complete board. Does anyone know where I can purchase this Board? The Numbers are MP-03AA (Conv-Out) or either 687oVS1531A(0) also which would be the Part Number? Thanx Alot for any help in this
How to Remove DRM from Protected Video/Audio to General Video/Audio
http://www.topmediasoft.com/media-converter-daniusoft.html Daniusoft Media Converter software can help you remove DRM from protected wmv, wma, m4p, m4v, m4a, aac files that purchased and downloaded from online music store and convert to general video and audio formats, you can enjoy playing on portable media players, such as iPod, Zune, Creative Zen, MP3 player, PSP.
Hello! I am a long time reader, but a new poster to this forum. Thanks in advance for any replies and help! I apologize if this is not posted under the correct topic.
I have a JVC av-56wp74 chassis # A120. Initially I had red convergence problems and it wouldn't adjust, so I checked the resistors and all are reading within range, did all solder connections on the convergence board, and ordered the exact same ic's that are in the set (stk-392-110) and replaced both of them (there are only two in the set).
