Television and Home Theater

Mitsubishi HD1080 series problem

This problem has been going on for the last 7 years or so.  My parents have given up on the tv but i still think it can be fixed.  So here's the problem:  When the tv is turned on the screen goes completely blue.  I found out by curiously messing with the settings that if I change the contrast/brightness/color all the way down and quickly turn the tv off and on again the tv no longer goes blue.  When i re-adjust the contrast/brightness/color everything looks ok except for a yellow shadow/tint around the black colors on tv.  I would like to know where the proble

3D TV discussions

Hello everyone....

 I just created this new forum section for 3D TV discussions. Feel free to discuss anything related to 3D.

 

 

Thanks

3D TV

Mitsubishi WS-A65 intermittent picture

Mitsubishi WS-A65- purchased at BestBuy in 2003.

Mits 55859 replaced caps and IC but still doesn't work

 I replaced the capacitors and the IC chip. When I turn on the tv it makes a crackling kind of staticy kind of noise and it looks like the guns are firing all over the screen. It stays on for about 10 seconds then shuts off. No blinking green light. Any suggestions before I put it in the garbage? Thanks.

lcd tv and vga input

HI

I HAVE A KROSS 60MM LCD TV AND VGA INPUT WHAT IT IS DOING IS THAT

YOU CAN NOT TURN IT OFF WHEN IT IS ON PULL OUT THE POWER FOR 5MINS

AND IT STAYS ON CAN ANY ONE OUT THEIR PLEASE TELL ME WHAT THE PROBLEM CAN BE

ERIC VISTA 

PLEASE SOMEONE HELP ME!!!! magnavox 37MF321D

OK SO I GOT THE VERY FAMILIAR NO PITURE, NO SOUND AND THE BLIKING GREEN LIGHT. DID THE INTERNET SEARCH FOUND THAT ITS USUALLY A CAPACITOR. SO I PULLED THE BOARD AND THERE IS A CAPACITOR BULGING. EASY ENOUGH WENT TO RADIO SHACK GOT ONE AND NOW I JUST NEED TO SOLDER ID IT.

 

HERES THE PROBLEM. A DIODE ON THE BOARD HAS BURNED. I NEED TO REPLACE IT BUT CANNOT IDENTIFY IT.

Pages

 

Connect With Techlore