Television and Home Theater

Picture of & location of the 9 Volt regulator

Good day fellows, did anybody has a picture of what do a 9 volt regulator looks like/ Or where exactly is this located on the video board?

My tv is Mitsubishi 65" Model# WS-65513. My pictures really looks wavy and I need to try if I can fix this myself.

Please and please email to [email protected]. or reply with your info.

Thanks very kindly.

Law

Mitsubishi WS-55859 shuts down when changing devices

Quite often when changing between devices (DVD to DBS or back) the TV shuts off then the timer light blinks for about 30 seconds before the TV comes back on. This started a couple of months prior to the dreaded full time blinking light (after a power outage). I replaced the seven CAPS and alls fine (thank you Larry and tvrepairkits) except for the original problem with the shutting off when switching. Can this be repaired and is this as easy a fix as replacing those CAPS? I just want this unit to last a couple more years.

JVC AV-48WP74 Good Picture - No Sound

I recently replaced the IC's and a single resistor that was shorted on my JVC AV-48WP74. The fix went fine - with everything working as normal for about two weeks. Then, the sound suddenly started going out and within a day it has stopped working completely. I've worked through the menu settings to ensure nothing was changed that would cause the sound to stop coming through the set's speakers and everything is set properly. There is sound from the cable box as it plays fine when routed through a receiver for a surround sound system.

Mits-WS65909 IC Replaced 2-2error still?

Turn on tv shuts down after couple of seconds. 2-2 error code. Replaced IC per instruction post by Larry. Replaced pico fuses, checked resisiter all good. Coil test not sure? post to post under board .1 ohms checked ic vertical output 1 probe to pin 2 other to pin 4 open(no beep). Checked all fuses look good. No capacitors bulging or leaking coils. Still error 2-2 UG! fuses do not blow.

HELP! Tony

 

Regarding 9volt regulator

Do anyone knows the exalt location of the 9volt regulator on a Mit. ws65513 and also if someone could email me a step by step instructions on how to replace this by my self. Please email me at  [email protected]. Thank you

magnavox no pic or sound can see channel on screen

model# pr2052 p101

chasis# ptv510-ah01

Pages

 

Connect With Techlore