Television and Home Theater

Hello,  I am gaving a problem on my unit philips 60pp935217. The problem is the screen fitment, i cleaned the mirror and the lenses and the picture is clear now and the convergence is adjusting but the outer border on all sides is expanded past the screen. I adjust to the best estimated crosshair location.  2)Another problem is when i use the component high deffinition on the 1080i setting the covergence is out of alignment and i get to adjust about 3 to 4 crosshairs then the tv shuts off, like a fail safe, it also does it if i let it stay in this setting.

hello,
I have wd-62627 and have promlem with it as a lot people have too. I am experiencing the blinking green light (of death) when the unit is plugged in.  Never get a picture or sound.  Tried system reset but no help.  After green light stops blinking, any button pressed on front panel or remote causes the green light to blink again. Any suggestions on how to repair other than Mitsubishi service would be greatly appreciated.  Thanks in advance.

Hello,

  tv model sony kp-46wt500 rear projection tv

here is the problem, i turn on everything is ok video and sound ok then about 10 -15 seconds fades to blue with some lines and black the standby led blinks 8 times stop for a few seconds and 8 blinks. now if i'm right 8 blinks is the audio area, but the it is wierd the sound and video work fine for about 10 -15 seconds when you first turn on. now if i try to turn on while the blicking it does the same 10 -15 seconds sound and video good then fade to blue then led 8 blinks.