hey guys, been reading over some threads here, and ive already found a mountain of info. got the chassis number and service manual from a thread, as well as the mits tips pdf. as the thread title suggests, ive got a 65" mitsu that fails to power on, i get a lit led for a few secs, some clicking from somewhere on one of the pcb's and power down, the self diag reads 2-2. ive looked all over the boards and dont see any bulging caps, ive also tried putting a dmm on the pico fuses as suggested by the mits-tips pdf for the v22. only problem with that is im not 100% sure its the same for my model since ive got the v24, and also im not sure exactly what to test for. the pdf says the fuses are for +24 and -24, is that 24v DC or AC? or can i just test them for continuity from one side to the other? also, im a little concerned about discharging the high voltage from the flyback, should that discharge by itself being unplugged overnight, or do i need to ground it somehow to make it safe?
thanks in advance!
greg in p'cola
