I'm having convergence problems with my Sony kp-65ws510 and I can't figure out what else to do! So far, my brother (an electrician) has changed out BOTH ic's (STK392-560) AND the burnt pico fuse (3.15A 125V) on the D board and still no luck. Still have the 3D look. He's rechecked the pico fuses and they're fine. He suggested that I might need to buy an entire D board but I wanted to get some more input before I dumped any more money into this! When he tried to adjust the screen, he said the red and green partially move but the blue doesn't move at all. He also wanted to know if anybody knew where I could get the STANDARD data line info, not the adjustable data line info. Any help would be tremondously appreciated! I thank you very much in advance for your help!
-Jim.
