I have a Sony kp-51ws510 with a convergence issue. I bought a tv repair kit, came with 2 IC's, 2 3.5 amp pico fuses, 2 5 amp pico fuses and 2 4.7 ohm resistors. Replaced all that and nothing. Checked 3.5 amp pico fuses as there are actually 6 and not 2. Found 2 more bad and replaced them.
Now the blue moves and can be lined up so far. But the red convergence goes up and down but not left or right? I read an article posted by Larry Dillion about blink codes, i get 6 blinks. Was looking for C515 & C516, Also IC 206. I cannot seem to locate them. I would appreciate any help. Is it possible to locate some schematics for this unit. I would like to get this fixed as i have other projects that need my attention..........
