Adjusting Convergence on Sony KP-51ws510

1 post / 0 new
misseth1
Adjusting Convergence on Sony KP-51ws510

I am not sure if I am even adjusting the convergence correctly or not. I don not have the remote and I am doing this from the panel on the tv. There are some white crosses and to the left side there is red and blue crosses side by side and some on the right side that are almost over lapping each other. I can make the box blue and and move the blue cross but when red it seems to move only up and down. So my question is.... am I even doing this correctly? Or are the chips needing to be replaced and also if they need to be replaced I saw on this site that I can send in the board to a place called Tristar and the will send another (this would be easier for us than trying to solder electronics)

Thank you for as many tips as possible ahead of time.

 

Connect With Techlore