When I turn the set on, red light blinks a couple times, and the set shuts off immediately. I replaced the AA9501846D board with AA95-01846D from partstore.com, and the set turned on and worked perfectly.. for 30 minutes, then shut off. Now, can turn it on when it's cold and it works for a brief period before it shuts off.
I'm not a tech, but have stumbled on this website looking for alternatives to the inevitably expensive service call. The only shop in town only does house calls and has quoted me $300 minimum for what he thinks would be my problem.
I am really just looking for any troubleshooting suggestions that might help me diagnose and solve my problem without resorting to that expensive service call. Any advice would be greatly appreciated!
$300 is not a bad price at all we charge $300-$385 if the Person Still has the Original module so we can rebuild it 80% of the time them replacement modules Don't Work Properly.
Can anyone offer any advice on how I should proceed or with troubleshooting tips to help me diagnose my problem? I'd rather not have to spend the $300 if I can avoid it. What could be overheating to the point of causing a safety shut down?